PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Abit NF7/-S/-M Final Bios 1.6


Gorkon
13.03.2003, 18:59
Nabend...

Neues Bios fürs Abit NF7/-S/-M ist raus und trägt Versionsnummer 1.6


Hier der Link: http://fae.abit.com.tw/eng/download/bios/dlbios.php?name=NF7-S&file=nf7-s/nf716.exe

Und das Changelog:

- Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in this BIOS package.

- Update on chip VGA BIOS to v4.1F.00.07.13 (for NF7-M only).

- Fix share memory allocation issue for NF7-M when AGP card installed.

- Fix fail to create DMI Pool data when CPUID=064X CPU installed.

- Fix booting failure issue for Corsair TwinX-3200LL and CMX256A-3200LL memory modules.

- Revise the DDR frequency reading during POST.

- Update on board Serial ATA BIOS to v4.2.12 (for NF7-S only). Please also update Serial ATA driver to 1.0.0.28.

- Disable power button temporarily when update BIOS. This is to protect BIOS data from corrupt if pushing power button during BIOS flashing.

- Fix the problem that CPU core voltage reading is a little lower in PC Health page; meanwhile, the Hardware Monitoring tool needs to be updated to "HWM_NF7V16.EXE" together with BIOS update.

- Correct the "Battery Voltage" wording to "3.3V Dual Voltage" in PC Health; meanwhile, the Hardware Monitoring tool needs to be updated to"HWM_NF7V16.EXE" together with BIOS update.

- Change the maximum CPU FSB from 200 to 250 MHz in SoftMenu.

BIOS Compile Date: 2/27/2003

mfg Gorkon

DiCaprisun
13.03.2003, 19:16
yep, läuft super bisher! ;D

stevo
13.03.2003, 21:06
jo auch keine probs. bisher ;D

karabulo
13.03.2003, 21:30
Den neuen Hardware Docotr gibs hier (http://fae.abit.com.tw/eng/download/dltools.php?name=ABIT%20Hardware%20Doctor&file=hw_doctor/nf7/HWM_NF7V16.EXE)

TobiasAlt
13.03.2003, 21:57
Bringds was in Hinsicht OCing?

KHAINE
16.03.2003, 13:22
Ich hab gegenüber dem Beta 16 kein Leistungzuwachs feststellen können.
Allerdings hab ich nun Probleme mit Onboard LAN.

Wenn Onboard LAN an ist, bootet WINXP gelegentlich nicht.

TobiasAlt
16.03.2003, 13:31
Ich hab bis jetzt noch nichts feststellen können!

-hanky-
16.03.2003, 14:55
"Change the maximum CPU FSB from 200 to 250 MHz in SoftMenu. "

Hmmm...also bei mir ging der FSB ( theoretisch ! ) schon vorher bis 237 Mhz ?!?

Ich hoffe mal das jetzt mindestens 200 Mhz stabil möglich sind :)

Kanns aber noch nicht testen, da ich meine CPU noch nicht unlocked habe.

-hanky-

Denina
16.03.2003, 16:00
Den einzigen Unterschied den ich bis jetzt feststellen konnte ist,daß die angezeigte Temperatur in dieser Version zumindest bei mir gegenüber den beiden Vorgänger-Versionen um etwa 4-5°C höher liegt (CPU-Temp),außerdem funktioniert auch der neueste WinBond Hardware Doctor (dessen Link oben angegeben ist) für diese BIOS-Version mal wieder nicht,2 Tage alles ok,am dritten zeigte er mir keinerlei Temps mehr an und auch keine Lüfterdrehzahl,aber ich benutze zur Kontrolle sowieso lieber Speedfan,dort ist alles deckungsgleich zur BIOS-Anzeige.

Ole
16.03.2003, 16:44
Hardwaredoktor funzt einwandfrei! Wenn er am Anfang funktionierte und jetzt nicht mehr liegt es an irgendetwas aber nicht an Inkompatibilität...

Thunderbird 1400
16.03.2003, 20:15
Original geschrieben von Gorkon
Nabend...

Neues Bios fürs Abit NF7/-S/-M ist raus und trägt Versionsnummer 1.6


Hier der Link: http://fae.abit.com.tw/eng/download/bios/dlbios.php?name=NF7-S&file=nf7-s/nf716.exe

Verdammt, ich konnte von dort noch nie was runterladen, immer sind alle Server platt, ist das normal??:-/



Copyright © 1999 - 2011 Planet 3DNow!
Rechtliche Hinweise