Abit NF7 / NF7-S Rev. 2.0 BIOS 1.1

elias

Grand Admiral Special
Mitglied seit
21.10.2001
Beiträge
2.244
Renomée
6
Standort
Basel
Abit hat für folgende Mainboards neue BIOS Versionen released: Abit NF7-S Rev. 1.0-1.2, Abit NF7 / NF7-M Rev. 1.0-1.2, Abit NF7 / NF7-S Rev. 2.0 (alle nVidia nForce2), Abit AT7 MAX2, Abit KD7 / KD7-Raid (alle VIA KT400). Die Compile-Daten der BIOS-Versionen liegen jeweils schon einige Zeit zurück, veröffentlicht wurden sie allerdings erst jetzt. Achtung: Die Board-Revisionen bei den Boards der NF7-Serie müssen unbedingt beachtet werden! Folgende Fixes wurden implementiert:

Abit NF7-S Rev. 1.0-1.2, Abit NF7 / NF7-M Rev 1.0-1.2:
<font size="1"><ul><i>1. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in this BIOS package.
2. Change the write-protection mechanism of Flash ROM programming.
3. Support Thorton, Throughbred, Barton 2600+ CPU.
4. The default value on DRAM Ration changes to "Auto".
5. Added "CPU Disconnect Function"option on chipset to turn on/off C1 disconnect.
6. The CPU frequency 1917Mhz revised to 1916MHz.
7. DMI Pool data shows to"socket A".
8. The default value of "Memory Timing" revises to "Optimal".
9. Fix the problem that system can not detect USB Device under WinME while resume from S3,S4 mode, and lead to usb connector failed. 10. Fix system can not show fan speed in PC Health Status while using lower speed FAN.
11. Add "IDE Bus Master" function to improve transfer speed of GHOST, and default value set up to disabled.
12. Fix the problem while disabled"IDE Controller", and truned off IDE Controller, it would fail to share IRQ 14, 15;thus, IDE Controller
13. would NOT be turned off, it would show "IDE Controller"IRQ to be "NA" in PCI list.
14. Provides "AGP aperture size" option for NF7-M, while use on chip VGA.</i></ul></font>
Abit NF7 / NF7-S Rev. 2.0:
<font size="1"><ul><i>1. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in this BIOS package.
2. Fixes incorrectly detect Thorton 2600+(166x12.5)CPU in SoftmenuIII.
3. Fixes DRAM hang up at POST code EFh for specific memory module.
4. Fix the problem that if used CPU 400FSB without User Define,it would ot show DDR xxx (xxx=200,266,333,400).
5. The default value of CPU FSB/DRAM freq revises to "Auto".
6. Adds "CPU Disconnect Function" to adjust C1 disconnects. The Chipset does not support C2 disconnect; thus, disable C2 function.
7. Fixes DMI Pool data to be Socket A, Product Name: NF7-S/NF7 (nVidia- nForce2), Version: 2X.
8. The frequency of CPU 1917Mhz revised to 1916MHz.
9. Update SIP table to solve systems crashed issue while using 400FSB CPU+DDR 333, and revise the SIP Table of 266FSB CPU.
10. The default value of "Memory Timings" revises to "Optimal".
11. Updates BPL to be 2.94.
12. Fix system can not show fan speed in PC Health Status while using lower speed FAN.
13. Add "IDE Bus Master"function to improve transfer speed of GHOST, and default value set up to disabled.
14. Fix the problem that systems can not detect USB Drvice under WinME resume from S3,S4 mode, and lead to usb connector failed.
15. Fine tune the OC ability of 333FSB CPU. </i></ul></font>
Abit AT7 MAX2:
<font size="1"><ul><i>1. Follow AMD's recommendation that "CPU Disconnect Function" should be implemented to make CPU slow down in idle state, and the default value sets up to Enable.
2. Follow AMD's recommendation to revise the trigger timing of LM90 for Palomino CPU(model 6).
3. Support Barton 2600+(333 FSB) and Thorton2000+(266 FSB) / 2200+(266 FSB) / 2400+(266 FSB) / 2600+(333 FSB).
4. Revises some CPU frequency(1466,1666,1916,2166)to be AMD officially suggested figures (1467,1667,1917,2167).
5. HPT 374 BIOS version 1.23. </i></ul></font>
Abit KD7 / KD7-Raid:
<font size="1"><ul><i>1. Follow AMD's recommendation that "CPU Disconnect Function" should be implemented to make CPU slow down in idle state, and the default value sets up to Enable.
2. Follow AMD's recommendation to revise the trigger timing of LM90 for Palomino CPU(model 6).
3. Fix the SCSI BIOS malfunction problem when three add-on cards installed together, PCI S3 VGA + GF4MX420 + DC390U3W(at PCI-1).
4. Supports Barton 2600+(333 FSB)and Thorton2000+(266 FSB) / 2200+(266 FSB) / 2400+(266 FSB) / 2600+(333 FSB).
5. Revises some CPU frequency(1466,1666,1916,2166)to be AMD officially suggested figures.(1467,1667,1917,2167). </i></ul></font><b>Download:</b><br><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162302">Abit NF7-S Rev. 1.0-1.2 BIOS 1.7</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162303">Abit NF7 / NF7-M Rev. 1.0-1.2 BIOS 1.7</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162304">Abit NF7 / NF7-S Rev. 2.0 BIOS 1.1</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162305">Abit AT7 MAX2 BIOS DD</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162306">Abit KD7 / KD7-Raid BIOS DN</a></li>

Weitere Final-BIOS Versionen findet Ihr bei uns in der Planet 3DNow! <a href="/faq/files/index.shtml#biosupdates">BIOS-Datenbank</a>, eine Anleitung zum Flashen in unseren <a href="/faq/bios/index.shtml#flash">FAQs</a>...

THX @dabongolo, Nano::Sammy & DeDe
 
Zuletzt bearbeitet:
Vergesst bitte die NF7-S Rev 1.1-1.2 User nicht.
Es gibt auch ein neues BIOS für diese Revisionen.

Hier der Link.
 
Zuletzt bearbeitet:
gut wollte nämlich grad fragen was mit uns armen ist, die keine rev 2.0 haben :D
 
steht auf nem aufkleber mit strichcode der senkrecht zu den PCIslots auf dem board klebt ... ganz rechts daraf v1.x (oder 2.0 :D)
 
3. Support Barton 2600+(333 FSB) and Thorton2000+(266 FSB) / 2200+(266 FSB) / 2400+(266 FSB) / 2600+(333 FSB).


^^ Was um alles in der Welt ist ein Thorten?
 
was aber nicht klärt was der thorton ist ... nen umgenannter thoroughbred oder wie ?? weil wozu noch nen proz mit 2000+ - 2600+ ?? die momentanigen sind doch billig genug und wenn er sich in der architektur nicht unterscheidet wozu das ganze ??
 
Hi!

Wenn mich nicht alles täuscht, dann hat der Neue nur weniger Cache als der T-Bred. Das ist dann auch schon alles.

8)
 
Original geschrieben von Son-Havoc
was aber nicht klärt was der thorton ist ... nen umgenannter thoroughbred oder wie ?? weil wozu noch nen proz mit 2000+ - 2600+ ?? die momentanigen sind doch billig genug und wenn er sich in der architektur nicht unterscheidet wozu das ganze ??

steht in der news meldung vom planet anders *noahnung*
 
Beinhaltet das neue BIOS für's NF7-S Rev. 1.1-1.2 jetzt offiziellen FSB 200 Support, oder noch nicht???
 
Original geschrieben von |>SoD<|Thunderbird
Beinhaltet das neue BIOS für's NF7-S Rev. 1.1-1.2 jetzt offiziellen FSB 200 Support, oder noch nicht???

So wie es bei mir aussieht nicht. Da schleichen sich kleine Macken ein wie z.B. Beim Runterfahren hängt sich der Rechner auf.

In diesem Sinne
 
Zurück
Oben Unten