App installieren
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Anmerkung: This feature may not be available in some browsers.
Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden.
Du solltest ein Upgrade durchführen oder ein alternativer Browser verwenden.
Du solltest ein Upgrade durchführen oder ein alternativer Browser verwenden.
Abit NF7 / NF7-S Rev. 2.0 BIOS 1.1
- Ersteller elias
- Erstellt am
Abit hat für folgende Mainboards neue BIOS Versionen released: Abit NF7-S Rev. 1.0-1.2, Abit NF7 / NF7-M Rev. 1.0-1.2, Abit NF7 / NF7-S Rev. 2.0 (alle nVidia nForce2), Abit AT7 MAX2, Abit KD7 / KD7-Raid (alle VIA KT400). Die Compile-Daten der BIOS-Versionen liegen jeweils schon einige Zeit zurück, veröffentlicht wurden sie allerdings erst jetzt. Achtung: Die Board-Revisionen bei den Boards der NF7-Serie müssen unbedingt beachtet werden! Folgende Fixes wurden implementiert:
Abit NF7-S Rev. 1.0-1.2, Abit NF7 / NF7-M Rev 1.0-1.2:
<font size="1"><ul><i>1. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in this BIOS package.
2. Change the write-protection mechanism of Flash ROM programming.
3. Support Thorton, Throughbred, Barton 2600+ CPU.
4. The default value on DRAM Ration changes to "Auto".
5. Added "CPU Disconnect Function"option on chipset to turn on/off C1 disconnect.
6. The CPU frequency 1917Mhz revised to 1916MHz.
7. DMI Pool data shows to"socket A".
8. The default value of "Memory Timing" revises to "Optimal".
9. Fix the problem that system can not detect USB Device under WinME while resume from S3,S4 mode, and lead to usb connector failed. 10. Fix system can not show fan speed in PC Health Status while using lower speed FAN.
11. Add "IDE Bus Master" function to improve transfer speed of GHOST, and default value set up to disabled.
12. Fix the problem while disabled"IDE Controller", and truned off IDE Controller, it would fail to share IRQ 14, 15;thus, IDE Controller
13. would NOT be turned off, it would show "IDE Controller"IRQ to be "NA" in PCI list.
14. Provides "AGP aperture size" option for NF7-M, while use on chip VGA.</i></ul></font>
Abit NF7 / NF7-S Rev. 2.0:
<font size="1"><ul><i>1. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in this BIOS package.
2. Fixes incorrectly detect Thorton 2600+(166x12.5)CPU in SoftmenuIII.
3. Fixes DRAM hang up at POST code EFh for specific memory module.
4. Fix the problem that if used CPU 400FSB without User Define,it would ot show DDR xxx (xxx=200,266,333,400).
5. The default value of CPU FSB/DRAM freq revises to "Auto".
6. Adds "CPU Disconnect Function" to adjust C1 disconnects. The Chipset does not support C2 disconnect; thus, disable C2 function.
7. Fixes DMI Pool data to be Socket A, Product Name: NF7-S/NF7 (nVidia- nForce2), Version: 2X.
8. The frequency of CPU 1917Mhz revised to 1916MHz.
9. Update SIP table to solve systems crashed issue while using 400FSB CPU+DDR 333, and revise the SIP Table of 266FSB CPU.
10. The default value of "Memory Timings" revises to "Optimal".
11. Updates BPL to be 2.94.
12. Fix system can not show fan speed in PC Health Status while using lower speed FAN.
13. Add "IDE Bus Master"function to improve transfer speed of GHOST, and default value set up to disabled.
14. Fix the problem that systems can not detect USB Drvice under WinME resume from S3,S4 mode, and lead to usb connector failed.
15. Fine tune the OC ability of 333FSB CPU. </i></ul></font>
Abit AT7 MAX2:
<font size="1"><ul><i>1. Follow AMD's recommendation that "CPU Disconnect Function" should be implemented to make CPU slow down in idle state, and the default value sets up to Enable.
2. Follow AMD's recommendation to revise the trigger timing of LM90 for Palomino CPU(model 6).
3. Support Barton 2600+(333 FSB) and Thorton2000+(266 FSB) / 2200+(266 FSB) / 2400+(266 FSB) / 2600+(333 FSB).
4. Revises some CPU frequency(1466,1666,1916,2166)to be AMD officially suggested figures (1467,1667,1917,2167).
5. HPT 374 BIOS version 1.23. </i></ul></font>
Abit KD7 / KD7-Raid:
<font size="1"><ul><i>1. Follow AMD's recommendation that "CPU Disconnect Function" should be implemented to make CPU slow down in idle state, and the default value sets up to Enable.
2. Follow AMD's recommendation to revise the trigger timing of LM90 for Palomino CPU(model 6).
3. Fix the SCSI BIOS malfunction problem when three add-on cards installed together, PCI S3 VGA + GF4MX420 + DC390U3W(at PCI-1).
4. Supports Barton 2600+(333 FSB)and Thorton2000+(266 FSB) / 2200+(266 FSB) / 2400+(266 FSB) / 2600+(333 FSB).
5. Revises some CPU frequency(1466,1666,1916,2166)to be AMD officially suggested figures.(1467,1667,1917,2167). </i></ul></font><b>Download:</b><br><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162302">Abit NF7-S Rev. 1.0-1.2 BIOS 1.7</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162303">Abit NF7 / NF7-M Rev. 1.0-1.2 BIOS 1.7</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162304">Abit NF7 / NF7-S Rev. 2.0 BIOS 1.1</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162305">Abit AT7 MAX2 BIOS DD</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162306">Abit KD7 / KD7-Raid BIOS DN</a></li>
Weitere Final-BIOS Versionen findet Ihr bei uns in der Planet 3DNow! <a href="/faq/files/index.shtml#biosupdates">BIOS-Datenbank</a>, eine Anleitung zum Flashen in unseren <a href="/faq/bios/index.shtml#flash">FAQs</a>...
THX @dabongolo, Nano::Sammy & DeDe
Abit NF7-S Rev. 1.0-1.2, Abit NF7 / NF7-M Rev 1.0-1.2:
<font size="1"><ul><i>1. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in this BIOS package.
2. Change the write-protection mechanism of Flash ROM programming.
3. Support Thorton, Throughbred, Barton 2600+ CPU.
4. The default value on DRAM Ration changes to "Auto".
5. Added "CPU Disconnect Function"option on chipset to turn on/off C1 disconnect.
6. The CPU frequency 1917Mhz revised to 1916MHz.
7. DMI Pool data shows to"socket A".
8. The default value of "Memory Timing" revises to "Optimal".
9. Fix the problem that system can not detect USB Device under WinME while resume from S3,S4 mode, and lead to usb connector failed. 10. Fix system can not show fan speed in PC Health Status while using lower speed FAN.
11. Add "IDE Bus Master" function to improve transfer speed of GHOST, and default value set up to disabled.
12. Fix the problem while disabled"IDE Controller", and truned off IDE Controller, it would fail to share IRQ 14, 15;thus, IDE Controller
13. would NOT be turned off, it would show "IDE Controller"IRQ to be "NA" in PCI list.
14. Provides "AGP aperture size" option for NF7-M, while use on chip VGA.</i></ul></font>
Abit NF7 / NF7-S Rev. 2.0:
<font size="1"><ul><i>1. Please use AWDFLASH 8.23D or later to update NF7 series BIOS. With incorrect AWDFLASH version, the GUID will be erased, and leads to IEEE1394 peer to peer function failed. AWDFLASH 8.23D is included in this BIOS package.
2. Fixes incorrectly detect Thorton 2600+(166x12.5)CPU in SoftmenuIII.
3. Fixes DRAM hang up at POST code EFh for specific memory module.
4. Fix the problem that if used CPU 400FSB without User Define,it would ot show DDR xxx (xxx=200,266,333,400).
5. The default value of CPU FSB/DRAM freq revises to "Auto".
6. Adds "CPU Disconnect Function" to adjust C1 disconnects. The Chipset does not support C2 disconnect; thus, disable C2 function.
7. Fixes DMI Pool data to be Socket A, Product Name: NF7-S/NF7 (nVidia- nForce2), Version: 2X.
8. The frequency of CPU 1917Mhz revised to 1916MHz.
9. Update SIP table to solve systems crashed issue while using 400FSB CPU+DDR 333, and revise the SIP Table of 266FSB CPU.
10. The default value of "Memory Timings" revises to "Optimal".
11. Updates BPL to be 2.94.
12. Fix system can not show fan speed in PC Health Status while using lower speed FAN.
13. Add "IDE Bus Master"function to improve transfer speed of GHOST, and default value set up to disabled.
14. Fix the problem that systems can not detect USB Drvice under WinME resume from S3,S4 mode, and lead to usb connector failed.
15. Fine tune the OC ability of 333FSB CPU. </i></ul></font>
Abit AT7 MAX2:
<font size="1"><ul><i>1. Follow AMD's recommendation that "CPU Disconnect Function" should be implemented to make CPU slow down in idle state, and the default value sets up to Enable.
2. Follow AMD's recommendation to revise the trigger timing of LM90 for Palomino CPU(model 6).
3. Support Barton 2600+(333 FSB) and Thorton2000+(266 FSB) / 2200+(266 FSB) / 2400+(266 FSB) / 2600+(333 FSB).
4. Revises some CPU frequency(1466,1666,1916,2166)to be AMD officially suggested figures (1467,1667,1917,2167).
5. HPT 374 BIOS version 1.23. </i></ul></font>
Abit KD7 / KD7-Raid:
<font size="1"><ul><i>1. Follow AMD's recommendation that "CPU Disconnect Function" should be implemented to make CPU slow down in idle state, and the default value sets up to Enable.
2. Follow AMD's recommendation to revise the trigger timing of LM90 for Palomino CPU(model 6).
3. Fix the SCSI BIOS malfunction problem when three add-on cards installed together, PCI S3 VGA + GF4MX420 + DC390U3W(at PCI-1).
4. Supports Barton 2600+(333 FSB)and Thorton2000+(266 FSB) / 2200+(266 FSB) / 2400+(266 FSB) / 2600+(333 FSB).
5. Revises some CPU frequency(1466,1666,1916,2166)to be AMD officially suggested figures.(1467,1667,1917,2167). </i></ul></font><b>Download:</b><br><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162302">Abit NF7-S Rev. 1.0-1.2 BIOS 1.7</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162303">Abit NF7 / NF7-M Rev. 1.0-1.2 BIOS 1.7</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162304">Abit NF7 / NF7-S Rev. 2.0 BIOS 1.1</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162305">Abit AT7 MAX2 BIOS DD</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20030419162306">Abit KD7 / KD7-Raid BIOS DN</a></li>
Weitere Final-BIOS Versionen findet Ihr bei uns in der Planet 3DNow! <a href="/faq/files/index.shtml#biosupdates">BIOS-Datenbank</a>, eine Anleitung zum Flashen in unseren <a href="/faq/bios/index.shtml#flash">FAQs</a>...
THX @dabongolo, Nano::Sammy & DeDe
Zuletzt bearbeitet:
DeDe
Lieutnant
- Mitglied seit
- 10.02.2002
- Beiträge
- 70
- Renomée
- 0
- Prozessor
- AMD 64 X2 4400+
- Mainboard
- Asus A8N32-SLI Deluxe
- Kühlung
- AMD Boxed
- Speicher
- 4x 512 Corsair XMS DDR400@DDR500
- Grafikprozessor
- XFX 7950GT passiv gekühlt
- Display
- Belinea 19" TFT
- Soundkarte
- Soundblaster X-Fi Xtreme Music
- Netzteil
- bequiet Straight Power 600 W
- Betriebssystem
- XP und Vista
- Webbrowser
- IE 7.0
Grenzdebil
Vice Admiral Special
- Mitglied seit
- 04.11.2002
- Beiträge
- 893
- Renomée
- 4
3. Support Barton 2600+(333 FSB) and Thorton2000+(266 FSB) / 2200+(266 FSB) / 2400+(266 FSB) / 2600+(333 FSB).
^^ Was um alles in der Welt ist ein Thorten?
^^ Was um alles in der Welt ist ein Thorten?
Original geschrieben von Grenzdebil
3. Support Barton 2600+(333 FSB) and Thorton2000+(266 FSB) / 2200+(266 FSB) / 2400+(266 FSB) / 2600+(333 FSB).
^^ Was um alles in der Welt ist ein Thorten?
http://www.planet3dnow.de/cgi-bin/newspub/viewnews.cgi?category=1&id=1048097023
Gruss OpenGL_Man
Son-Havoc
Vice Admiral Special
- Mitglied seit
- 05.09.2002
- Beiträge
- 543
- Renomée
- 0
was aber nicht klärt was der thorton ist ... nen umgenannter thoroughbred oder wie ?? weil wozu noch nen proz mit 2000+ - 2600+ ?? die momentanigen sind doch billig genug und wenn er sich in der architektur nicht unterscheidet wozu das ganze ??
Son-Havoc
Vice Admiral Special
- Mitglied seit
- 05.09.2002
- Beiträge
- 543
- Renomée
- 0
Original geschrieben von Son-Havoc
was aber nicht klärt was der thorton ist ... nen umgenannter thoroughbred oder wie ?? weil wozu noch nen proz mit 2000+ - 2600+ ?? die momentanigen sind doch billig genug und wenn er sich in der architektur nicht unterscheidet wozu das ganze ??
steht in der news meldung vom planet anders
Thunderbird 1400
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 17.972
- Renomée
- 315
- Prozessor
- Ryzen 5900X
- Mainboard
- MSI X570-A Pro
- Kühlung
- Corsair H115i Pro AiO Wakü
- Speicher
- 4x8GB Corsair DDR4-3200 CL16
- Grafikprozessor
- AMD RX6900XT
- Display
- 55" TV & Leinwand
- SSD
- 2TB Samsung 980 Pro (M.2), 2x 2TB Transcent (M.2), 1TB Crucial MX500 (SATA)
- HDD
- 2TB
- Soundkarte
- Onboard
- Gehäuse
- Fractal Design North (white)
- Netzteil
- 850W be quiet! Pure Power 12M ATX3.0
- Betriebssystem
- Windows 10 Pro
- Webbrowser
- Firefox
Beinhaltet das neue BIOS für's NF7-S Rev. 1.1-1.2 jetzt offiziellen FSB 200 Support, oder noch nicht
Original geschrieben von |>SoD<|Thunderbird
Beinhaltet das neue BIOS für's NF7-S Rev. 1.1-1.2 jetzt offiziellen FSB 200 Support, oder noch nicht
So wie es bei mir aussieht nicht. Da schleichen sich kleine Macken ein wie z.B. Beim Runterfahren hängt sich der Rechner auf.
In diesem Sinne
Ähnliche Themen
- Antworten
- 1
- Aufrufe
- 269
- Antworten
- 0
- Aufrufe
- 545
- Antworten
- 0
- Aufrufe
- 167
- Antworten
- 0
- Aufrufe
- 420