OCZ zeigt auf der CeBIT seine neue Generation von Solid State Drives (SSD) namens Z Drive. Es handelt sich dabei um eine SSD auf Basis von MLC-Bausteinen. Um die Lese- und Schreibperformance zu erhöhen, kommt SSD-intern ein Hardware-Raid Controller zum Einsatz, der laut Hersteller die Transferrate auf bis zu 600 MB/s Lesen und 500 MB/s Schreiben erhöhen soll.
Der Raid-Controller arbeitet mit einem zusätzlichen 256 MB großen Speicher onboard, der mit DDR2 ECC bestückt ist. Da die SATA-Schnittstelle in der aktuellen Revision 2.x nicht mehr als 300 MB/s Transferrate zur Verfügung stellen kann, hat OCZ die Z Drive als PCI-Express x8 Karte ausgeführt. Somit umgeht die SSD den SATA-Flaschenhals, indem sie direkt ans PCIe-Interface angeschlossen wird. Voraussetzung ist natürlich, dass das Mainboard noch einen freien x8- oder x16-Slot zur Verfügung hat.
Folgende Daten gibt OCZ für das Z Drive an:
• 1 Terabyte MLC-based SSD with 256MB of Local Cache (On Demo) • Up to 4 Terabytes this year • Hardware Based RAID Controller • PCI -Express x8 • 256 MB of DDR II memory with ECC protection • Max Read: up to 600MB/s • Max Write: up to 500MB/s • Sustained Write: up to 400MB/s
Über Preise spricht man derzeit noch nicht, wohl aber über die nahe Zukunft. So stellt OCZ noch in diesem Jahr eine 4 TB Variante der Z Drive in Aussicht.
Etwas weltlicher präsentieren sich die übrigen SSDs von OCZ, die in verschiedene Anforderungsprofile eingeteilt sind: Summit (=Premium), Vertex (=Performance), Apex (=Mainstream) und Solid (=Value).
Das Topmodell Summit kommt dabei mit folgenden Eckdaten zum Kunden:
Supports 1.5/3.0Gbps SATA I/II interface • Fully compliant with Serial ATA International Organization • Capacity: 2.5inch: 30GB / 60GB / 120GB / 250GB • Data Cache Size: up to 128MB • Performance: • READ: up to 230MB/s • WRITE: up to 210MB/s • High Reliability based on: 6, 12, 16bits/sector correctable by BCH mode • Access Time: minimum 30usec. • Power on Ready time: less than 0.5sec • MTBF > 1,500,000 Hours
Vertex
Supports 1.5/3.0Gbps SATA I/II interface • Fully compliant with Serial ATA International Organization • Capacity: 2.5inch: 30GB / 60GB / 120GB / 250GB • Data Cache Size: up to 64MB • Performance: • READ: up to 250MB/s (120GB ratings) • WRITE: up to 180MB/s (120GB ratings) • High Reliability based on: 6, 12, 16bits/sector correctable by BCH mode • Access Time: minimum 30usec. • Power on Ready time: less than 0.5sec • MTBF > 1,500,000 Hours
Apex
Supports 1.5/3.0Gbps SATA I/II interface • Fully compliant with Serial ATA International Organization • Capacity: 2.5inch: 30GB / 60GB / 120GB / 250GB • Performance: • READ: up to 230MB/s • WRITE: up to 160MB/s • High Reliability: based on the internal 15bit BCH mode • Access Time: 0.1ms • Power on Ready time: less than 0.5sec • MTBF > 1,500,000 Hours
Solid
Supports 1.5/3.0Gbps SATA I/II interface • Fully compliant with Serial ATA International Organization: Serial ATA Revision 2.6 • Fully compliant with ATA/ATAPI‐7 Standard • Capacity: 2.5inch: 30GB / 60GB / 120GB / 250GB • Performance: • READ: up to 155MB/s • WRITE: up to 90MB/s • High Reliability based on the internal BCH 15bit ECC • Supports SMART (Self‐Monitor Analysis and Reporting Technology) • Data integrity under power‐cycling • MTBF > 1,500,000 Hours Write/Erase Cycles: minimum 10,000cycles
Diesen Artikel bookmarken oder senden an ...
