Nachdem wir Euch gerade noch darüber informiert haben, welche ENMIC Mainboards AthlonXP-fähig sind, hier nun die passenden Bios Updates dazu, welche allesamt auf den 17.10.01 datiert sind:
ENMIC 8KAX+:
1) Fix FAN Sensor to make system crash issue if the FAN speed overflow. 2) Support Show PC health in Pause 3) Add item "MP Capable bit identify" for show Athlon MP processor string > (Default will not identify MP processor)
1) Fix FAN Sensor to make system crash issue if the FAN speed overflow 2) Support Show PC health in Pause 3) Add item "MP Capable bit identify" for show Athlon MP processor string > (Default will not identify MP processor)
1) Solved system will hang if CPU ratio set to 14,15 2) Tune up 8TCX2+ Host Clock from 99.9 to 100.64Mhz. 3) Fix up if change JCLK1 jumper setting will make CMOS checksum error 4) Set the maximum clock up to 200Mhz 5) Set DDR SDRAM CAS latency to 2.5 if 3 DIMM plugged 6) 5 bits FID CPU support 7) Fixed install WindowsXP OS fail with ASUS v8200 AGP card 8) Average all available IRQ for PCI device because system will hang in verify DMI if one IRQ collects device number greater than 5. 9) Change AGP driving for AGP 4X in KT266 CE Version 10) Add item "MP Capable bit identify" for show Athlon MP processor string (Default will not identify MP processor)
1) Supports new feature "Easy Boot Menu" & "Magic PCHealth" 2) Fixed Windows XP / Administrative Tools / Event viewer / System / ACPI error marked 3) Solved S3 fail if define "CDROM_SLOWDOWN_PATCH" and CDROM have been down mode. 4) Solved system will hang if CPU ratio set to 14,15 5) Set the maximum clock up to 200Mhz 6) 5 bits FID CPU support 7) Fixed install WindowsXP OS fail with ASUS v8200 AGP card 8) Average all available IRQ for PCI device because system will hang in verify DMI if one IRQ collects device number greater than 5. 9) Add item "MP Capable bit identify" for show Athlon MP processor string (Default will not identify MP processor)
Diesen Artikel bookmarken oder senden an ...
