Speedfan läuft unter Windows ab Windows 98.

Changelog:

- added full support for ATI RADEON video cards (including CrossFire configurations and fan control)
- completely rewritten DELL support
- DELL support is now enabled on a wider range of models
- added full support for ITE IT8772F
- added support for Fintek F71889A
- added full support for SMSC EMC2103-1 and SMSC EMC2103-2
- added support for Fintek F71869AD
- added support for Fintek F71862 at unusual addresses
- preliminary support for SMSC SCH5317
- fixed Nuvoton W83627DHG-P PWM MODE advanced settings
- fixed ASUS ATK0110 readings on several motherboards
- fixed ATK0110 support on some Asus motherboards
- enabled SMBus on Intel ICH9M-E, if needed
- added full AMD Hudson-2 SMBus support
- TACPISonySensor support is now probed on all SONYs
- fixed multiple glitches and bug related to Advanced Fan Control UI
- in Advanced Fan Control dialog, control points can be fine tuned (+1,-1,+10,-10) using the right mouse button
- SMART Fitness synthetic value now is more stringent with some specific issues, reporting 0% in some cases that require immediate attention

• SpeedFan 4.45 [Setup] - P3D

• Offizielle Internetpräsenz
• Weitere Downloads

Speedfan läuft unter Windows ab Windows 98.

Changelog:

- added full support for ATK0110
- added Advanced Fan Control including a graphical UI for configuration
- DELL support is now working on 64 bit systems too
- DELL support can change fan speeds, but if the BIOS is overriding it, there is little SpeedFan can do
- added support for ST STTS3000 and ST STTS2002 DIMM temperature sensors
- reported temperatures and fan speed on Sony Vaio VGN-FW21E
- fan speed is reported on some ASUS laptops with ATK0100 (like the F81Se and the K52JT)
- added preliminary identification of Fintek F71862
- PWM values can now be logged too
- temperatures are no longer tied to every fan speed as a default
- added F71809 PWM setting and reading
- improved SMART hard disk temperature reading if multiple attributes seem to report it
- rebuilt ARECA DLL with latest library and improved Areca RAID support
- more aggressive behaviour setting PWMs (this might help on systems where something else tries to change them)

• SpeedFan 4.44 [Setup] - P3D

• Offizielle Internetpräsenz
• Weitere Downloads

Speedfan läuft unter Windows ab Windows 98.

Changelog:

- restored full nVidia video card support
- hard disk finding now uses more stringent rules that lead to a much faster program startup
- fixed configuration issues with multiple nVidia video cards on the same system
- greatly improved User Interface responsiveness
- administrator privileges are now required and enforced to run SpeedFan
- added full support for Nuvoton W83627DHG-P, including PWM control
- added full support for Nuvoton NCT6776F, including PWM control
- added full support for Fintek F71808E, including PWM control
- added full support for Fintek F71809, including PWM control
- added full support for ITE IT8728F, including PWM control
- added full support for EMC2113, including PWM control
- added full support for Nuvoton W83L771
- added full PWM control for ITE IT8721F
- added support for several JEDEC JC 42.4 compliant sensors
- fully verified ITE IT8721F fan reading and control
- improved support for ACPI Thermal Zone temperatures reporting
- fixed Nuvoton W83667HG PWM MODE advanced settings
- fixed Nuvoton W83667HG-B PWM MODE advanced settings
- fixed Nuvoton W83677HG-I PWM reading
- fixed Winbond W83791D and Winbond W83792D TEMP2 and TEMP3 readings
- fixed Nuvoton W83627DHG, W83627EHF and W83667HG PWM TYPE settings
- fixed ITE IT8728F H/M identification
- fixed ITE IT8728F advanced properties support
- fixed ITE IT8720F PWM control
- fixed PWM readings for fans 4 and 5 on some ITE IT8712F
- added support for 3 additional temperature readings for Nuvoton W83677HG-I
- added support for Vtt voltage reading on ADT7490
- added Fintek F71858 support for fans, PWMs and advanced options
- improved detection of AD7417 to avoid false identifications
- Intel Core temperature are now properly read for 2nd Generation Intel Core Processor Family (Sandy Bridge)
- TIntelCoreSensor avoids reading temperatures from threads resulting from Hyper-Threading
- fixed temperature reporting on some hard disks that do not expose the usual SMART attribute
- aded identification of Fintek F71869F
- added preliminary identification of ITE IT8772F
- added preliminary detection of Asus A8000B
- fixed a bug that prevented access to the SMBus on some ATI southbridges
- voltage scans are no longer automatically enabled for several ITE chips
- added preliminary identification for Fintek F71859
- added identification of Fintek F71809 and Fintek F71859
- added full support for Intel 6 Series SMBus
- added Intel NM10 SMBus enabler
- added full support for Intel ICH10 82801JD/DO SMBus
- /NONVIDIAI2C command line parameter is properly honoured again
- fixed a nasty bug in Intel SMBus support routines that could lead to releasing SMBus ownership at the wrong time
- improved Intel SMBus routines
- added exact voltage readings for Intel DH61BE, DH61CR, DH61DL, DH61WW, DH67BL, DH67CL, DH67GD, DH67CF, DP67BA, DP67DE, DP67BG, DB65AL, DQ67EP, DQ67OW, DQ67SW, DX58OG
- improved voltage readings for Asus P8P67 DeLuxe, P8P67 and P8P67-M
- pre-built configuration support has been added
- pressing on the left of the tabs on the main form no longer closes the program

• SpeedFan 4.43 [Setup] - P3D

• Offizielle Internetpräsenz


• CPUID CPU-Z 1.57
• GPU-Z 0.5.1
• GPU Caps Viewer 1.10.0
• System Information for Windows (SIW) 2010 build 0714

Speedfan läuft unter Windows ab Windows 98.

Changelog:

- greatly improved nVidia video card support
- added full access to hardware monitor chips available on several nVidia video cards (enabled I2C writes to allow fan speed control too)
- improved Intel QST support
- Intel QST now checks first for 2.0, then falls back to 1.0, if needed
- added support for external USB drives using JMicron controllers
- fixed fan speed computation for several Analog Devices chips (ADM1027, ADT7463, ADT7475, ADT7476, ADT7468, ADT7473, ADT7490) when configured for non standard number of pulses per revolution
- MUTEXes used to synchronize with other tools while accessing buses are now defined Global
- fixed CPU usage bars size on the main window
- enabled SMBus access on ICH10 and ICH10R, if needed
- if SpeedFan service is unavailable, a message dialog is shown and the program stops running
- added scan exceptions for Asus P5N-T DELUXE and Intel DX58SO
- SEND REPORT now includes a list of ACPI devices found

• SpeedFan 4.42 [Setup] - P3D

• Offizielle Internetpräsenz


• System Information for Windows (SIW) 2010 build 0714
• NVIDIA Inspector Tool 1.94
• CPUID CPU-Z 1.56
• Core Temp 0.99.8.0
• GPU-Z 0.4.7

Speedfan läuft unter Windows ab Windows 98.

Changelog:

- added full support for Intel 5 Series/3400 Series SMBus
- added full support for Intel QST 2.x
- added full support for fan control for Intel QST
- added full support for Fintek F71889F
- added full support for Fintek F71889ED
- added full support for SB8x0 SMBus
- added full support for Nuvoton W83677HG-I
- added full support for Nuvoton W83667HG-B
- added SB7xx/8xx PM2 fan speed readings and fan control
- added full support for MCP98242
- added full support for CAT34TS02
- added support for ITE IT8721F
- added support for USB hard disk enclosures with Cypress chipset
- added W83791D advanced settings for PWM MODEs
- improved ADT7490 PWM MODE advanced settings
- added ADVANCED options for Fintek F75387 PWM MODEs
- fixed Fintek F75387F PWM setting
- enabled SMBus on Intel ICH9-M, if needed
- added detection of LIS331DL
- added Intel QST 2.x advanced option to revert back to AUTO fan control
- upon resume from suspend only those fans that are automatically variated are initially set to 100%
- identified more CPUs
- Intel Atom Series 300 Tjmax set to 90C
- HECI support works only on Windows 2000 and later
- AMCC/3ware support works only on Windows 2000 and later
- added more names for SMART attributes
- added a new option to CONFIGURE / OPTIONS to disable SMART Summary Error Log on program start (this can dramatically improve SpeedFan startup time)
- the UI is now updated whenever new SMART data is read from the selected hard disk
- now, in CONFIGURE / EVENTS, when you press UPDATE to change some event, the editing fields are automatically cleared and the OK button is automatically enabled
- restored access to SMART attributes on AdvSmart, Areca and AMCC/3ware connected drives in Event configuration window
- events can now react to FITNESS and PERFORMANCE values of SMART hard disks
- added NOADVSMARTSCAN command line switch
- the first line of the email sent by an EVENT now has been changed to include the Machine Name

• SpeedFan 4.41 [Setup] - Lokaler Mirror

• Offizielle Internetpräsenz


• System Information for Windows (SIW) 2010 build 0714
• NVIDIA Inspector Tool 1.90
• CPUID CPU-Z 1.55
• Core Temp 0.99.7.3
• GPU-Z 0.4.4

>> Kommentare