Memtest86+ v1.55 erschienen

Original geschrieben von Patmaniac Ganz neu dabei: Intels 955X (Glenwood) und nVidias nForce 4.

Zum Vergrößern anklicken....

Der NF4 wird schon länger unterstützt, nur eben nicht der NF4 für Intel.

Original geschrieben von Dymas


...die dos-win exe geht net...

Zum Vergrößern anklicken....

+ Run from floppydisk

Memtest86+ is directly executable by any modern x86 compatible machine, by
writing the bootable binary to a floppy disk one can boot from the disk to
run memtest.

Simply download the appropriate package, the Pre-Compiled Bootable Binary
(.gz) package for Linux users and the Pre-Compiled package for Floppy (DOS
- Win) for Windows users.

For Windows, unzip the package into a directory like C:\memtest, insert a
blank floppy into your a: disk drive and run the install.bat file. As the
install prompts you, to use memtest directly, leave the disk in the drive
and reboot your machine.

For Linux, unpack the package into your home directory, insert a blank
floppy into your floppy drive and execute 'dd if=~/memtest+-1.xx.bin.gz
of=/dev/fd0 conv=osync' replacing 1.xx with the correct version number of
the memtest86+ you downloaded. To run memtest immediately reboot your
machine.

Your machine should now boot from the disk, display the word Loading
folowed by a series of periods and then show a screen much like the
screenshots on the memtest86+ web page. The test is automatically started.

If your machine simply boots back into Windows/Linux you will most likely
have to configure your BIOS to attempt to boot from floppy disk on
startup, refer to your computer's/mainboard's manual how to do this.

When you are done testing simply remove the floppy and reset your
computer, if ever you want to execure the test again simply reinsert the
disk and reboot/start your computer.

Zum Vergrößern anklicken....