Dual Core wird nicht erkannt -> ACPI Experten anwesend ?

Opteron · 10.03.2008

Hiho,

ich darf seit kurzem einen "tollen" Opteron 275 mein Eigenen nennen.
BIOS meldet Opteron 275 dual core .. schaut also alles gut aus ... blöderweise erkennen sämtliche OSe (Win& Knoppix) aber nur ein Core, Solaris stürzt sogar gleich komplett beim Booten ab.

Ich hab das Ganze mal auf eine fehlende ACPI Unterstützung im BIOS zurückverfolgt. Unter Linux hat man jetzt die (Hacker) Möglichkeit die ACPI Tabellen mit eigenen zu überschreiben:
http://www.lesswatts.org/projects/acpi/overridingDSDT.php
... nur stellt sich die Frage ... mit was ?

Zuallererst bräuchte ich also ersteimal Hilfe, indem jemand bei seinem dual Core System die ACPI Werte mittels acpidump ausliest. Am Besten wäre es, wenn das BIOS noch eine Einstellung anböte, mit der der 2te Kern deaktiviert wird, denn dann könnte man die Unterschiede erkennen.

Absolutes Traum/Fernziel wäre wenn ich dann noch das BIOS so umschreiben könnte, dass die andren OSe auch was davon haben .. aber ob ich das hinbekommen ... *noahnung*

Bis dahin gilt auf alle Fälle folgendes tolles Bildchen vom AMD Win-Spannungstool:

Vielen Dank !

Alex

P.S: und nein, mein aktuelles BIOS hat sowas nicht, neuere BIOSe gibts auch nicht, Handarbeit ist auf alle Fälle nötig

2000k.sie · 11.03.2008

Was hast du denn da für ein Board?
Sind die Betriebssysteme neu installiert (ok, bei Knoppix hast du wahrscheinlich von der Live-CD gestartet, oder?)?

Hat das Board denn offiziell Multi-Core-Support?

Opteron · 11.03.2008

2000k.sie schrieb:
Was hast du denn da für ein Board?
Sind die Betriebssysteme neu installiert (ok, bei Knoppix hast du wahrscheinlich von der Live-CD gestartet, oder?)?

Hat das Board denn offiziell Multi-Core-Support?

Hiho,

ja der Witz ist natürlich dass es keinen offiziellen Support gibt .. bzw. eigentlich ja schon, das BIOS habe ich damals vom Gigabyte Support als "dual core" fähig bekommen. Deswegen wird die CPU wohl auch optimal vom BIOS erkannt, aber die ACPI tables haben sie wohl vergessen anzupassen. Jetzt da noch bei GA nachzufragen wäre sinnlos, es ist ein Uraltboard, single socket 940, konstruiert für die ersten AthlonFXe, Typenname K8NNXP-940.

OS sind nicht neuinstalliert, bei Windoof hab ich den ACPI Mehrprozessor Kernel nachinstalliert, das reicht laut landläufigen Beiträgen hier im Forum. Knoppix 5.2. war von der Live-DVD, wie Du schon vermutet hattest. Da ist ein SMP Kernel drauf, der sollte also auf alle Fälle Dual Core fähig sein.

Das mit den ACPI tables scheint schon machbar zu sein, hier fragt einer nach, ob es auch unter Solaris eine Table load Funktion gibt, um Hyperthreading zu aktivieren:

http://forum.java.sun.com/thread.jspa?threadID=5097559&messageID=9334471

Sollte sich nicht viel von meinem Unterfangen unterscheiden.

Falls noch jemand Interesse an dem Thema hat, hier ist ein guter Überblick:
http://www.genunix.org/gen/crashdump/book.pdf S. 100
http://forums.gentoo.org/viewtopic-t-122145-start-0-postdays-0-postorder-asc-highlight-.html

Hier mal ne dmesg von einem funktionierenden dual core( SUN Fire x2200 mit einem Opteron) :

Linux version 2.6.17 (root (at mark) Knoppix) (gcc version 4.0.4 20060507
(prerelease) (Debian 4.0.3-3)) #4 SMP PREEMPT Wed May 10 13:53:45 CEST
2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007fffe000 (ACPI data)
BIOS-e820: 000000007fffe000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 524272
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 294896 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v002 ACPIAM ) @ 0x000faac0
ACPI: XSDT (v001 A M I OEMXSDT 0x08000604 MSFT 0x00000097) @ 0x7fff0100
ACPI: FADT (v003 A M I OEMFACP 0x08000604 MSFT 0x00000097) @ 0x7fff0290
ACPI: MADT (v001 A M I OEMAPIC 0x08000604 MSFT 0x00000097) @ 0x7fff0390
ACPI: SPCR (v001 A M I OEMSPCR 0x08000604 MSFT 0x00000097) @ 0x7fff0410
ACPI: OEMB (v001 A M I AMI_OEM 0x08000604 MSFT 0x00000097) @ 0x7fffe040
ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x7fff6280
ACPI: DSDT (v001 S39_3 S39_3A10 0x00000a10 INTL 0x20051117) @ 0x00000000
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Built 1 zonelists
Kernel command line: ramdisk_size=100000 init=/etc/init lang=us
apm=power-off vga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix
BOOT_IMAGE=linux
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1809.390 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2074120k/2097088k available (2225k kernel code, 21716k reserved,
807k data, 324k init, 1179584k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 3623.58 BogoMIPS
(lpj=7247165)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
00002001 00000000 0000001f
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000
00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001
00000000 0000001f
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
SMP alternatives: switching to UP code
CPU0: AMD Dual-Core AMD Opteron(tm) Processor 2210 stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3618.86 BogoMIPS
(lpj=7237724)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
00002001 00000000 0000001f
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000
00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001
00000000 0000001f
CPU1: AMD Dual-Core AMD Opteron(tm) Processor 2210 stepping 02
Total of 2 processors activated (7242.44 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=4000
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 729k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:06.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *15
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:0a: ioport range 0xa00-0xa0f has been reserved
pnp: 00:0a: ioport range 0xa10-0xa1f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:01:05.0
PCI: Bridge: 0000:00:06.0
IO window: e000-efff
MEM window: fd000000-fdefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.0
IO window: disabled.
MEM window: fdf00000-fdffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: fdf00000-fdffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0f.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:05:00.0 to 64
PCI: Setting latency timer of device 0000:00:0f.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1160725806.776:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:0a.0 to 64
pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0a.0

cie00]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0

cie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0

cie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0

cie00]
PCI: Setting latency timer of device 0000:00:0f.0 to 64
pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0f.0

cie00]
vesafb: framebuffer at 0xfd000000, mapped to 0xf8880000, using 3072k,
total 8192k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at c5eb:000c
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
NFORCE-MCP55: chipset revision 161
NFORCE-MCP55: not 100% native mode: will probe irqs later
NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda

io, hdb

io
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide1...
libata version 1.20 loaded.
sata_nv 0000:00:05.0: version 0.8
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 23 (level,
low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:05.0 to 64
ata1: SATA max UDMA/133 cmd 0xD480 ctl 0xD402 bmdma 0xCC00 irq 16
ata2: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xCC08 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113)
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023
88:407f
ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_nv
ata2: SATA link up 1.5 Gbps (SStatus 113)
ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023
88:407f
ata2: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_nv
Vendor: ATA Model: ST3250820AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3250820AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: Attached scsi disk sdb
PNP: PS/2 Controller [PNP0303

S2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
NET: Registered protocol family 1
NET: Registered protocol family 15
Starting balanced_irq
Using IPI No-Shortcut mode
ACPI wakeup devices:
PS2K NSMB USB0 USB2 NMAC NMAD P0P1 HDAC BR10 BR11 BR12 BCM1 BR13 BR14
BR15 PWRB
ACPI: (supports S0 S1 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Failed initialization of WD-7000 SCSI card!
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1 -> Link [LUB2] -> GSI 22 (level,
low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 17, io mem 0xfcffac00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver
(PCI)
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 21 (level,
low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 18, io mem 0xfcffb000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
Initializing USB Mass Storage driver...
usb 1-9: new high speed USB device using ehci_hcd and address 4
usb 1-9: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 2-7: new low speed USB device using ohci_hcd and address 3
usb 2-7: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
Vendor: IOMEGA Model: CDDVD522416EC3-C Rev: 0P5B
Type: CD-ROM ANSI SCSI revision: 00
sr0: scsi3-mmc drive: 8x/52x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
usb-storage: device scan complete
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.04
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 31120 blocks, 65536 bytes/block, largest
block is 65552 bytes.
ISO 9660 Extensions: RRIP_1991A
Registering unionfs 20060221-0341
Freeing unused kernel memory: 324k freed
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
Using specific hotkey driver
usbcore: registered new driver hiddev
input: Virtual USB MULTIMEDIA KEYBOARD as /class/input/input0
input: USB HID v1.10 Keyboard [Virtual USB MULTIMEDIA KEYBOARD] on
usb-0000:00:02.0-2
input: Virtual USB MULTIMEDIA KEYBOARD as /class/input/input1
input: USB HID v1.10 Mouse [Virtual USB MULTIMEDIA KEYBOARD] on
usb-0000:00:02.0-2
input: Logitech USB Receiver as /class/input/input2
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on
usb-0000:00:02.0-7
input: Logitech USB Receiver as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-7
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 20 (level,
low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:08.0 to 64
forcedeth: using HIGHDMA
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
eth0: forcedeth.c: subsystem: 0108e:534b bound to 0000:00:08.0
ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 23 (level,
low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:09.0 to 64
forcedeth: using HIGHDMA
ts: Compaq touchscreen protocol output
eth1: forcedeth.c: subsystem: 0108e:534b bound to 0000:00:09.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
tg3.c:v3.57 (Apr 28, 2006)
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
ACPI: PCI Interrupt 0000:06:04.0[A] -> Link [LNED] -> GSI 19 (level,
low) -> IRQ 20
eth2: Tigon3 [partno(BCM95715) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit)
10/100/1000BaseT Ethernet 00:16:36:7b:41:f3
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
eth2: dma_rwctrl[76148000] dma_mask[64-bit]
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18
ACPI: PCI Interrupt 0000:06:04.1 -> Link [LNEA] -> GSI 18 (level,
low) -> IRQ 21
eth3: Tigon3 [partno(BCM95715) rev 9003 PHY(5714)] (PCIX:133MHz:64-bit)
10/100/1000BaseT Ethernet 00:16:36:7b:41:f4
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1]
TSOcap[1]
eth3: dma_rwctrl[76148000] dma_mask[64-bit]
fuse init (API version 7.6)
Linux agpgart interface v0.101 (c) Dave Jones
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel (at mark) redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 17
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth2: link is not ready
ADDRCONF(NETDEV_UP): eth3: link is not ready
IPv6 over IPv4 tunneling driver
eth1: no IPv6 routers present
eth0: no IPv6 routers present

Bei mir schaut das so aus:

Linux version 2.6.19.5 (root@Knoppix) (gcc version 4.1.2 20061115 (prerelease) (
Debian 4.1.1-21)) #4 SMP PREEMPT Sat Mar 3 02:19:32 CET 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
BIOS-e820: 00000000dfff0000 - 00000000dfff3000 (ACPI NVS)
BIOS-e820: 00000000dfff3000 - 00000000e0000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4b90
Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 1048576
early_node_map[1] active PFN ranges
0: 0 -> 1048576
On node 0 totalpages: 1048576
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 6400 pages used for memmap
HighMem zone: 812800 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f66d0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0xdfff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0xdfff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0xdfff7d00
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
Detected 1808.275 MHz processor.
Built 1 zonelists. Total pages: 1040384
Kernel command line: ramdisk_size=100000 init=/etc/init lang=de apm=power-off vg
a=791 initrd=minirt.gz nomce loglevel=0 libata.atapi_enabled=1 quiet nmi_watchdo
g=0 BOOT_IMAGE=knoppix BOOT_IMAGE=linux -v
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3629484k/4194304k available (2748k kernel code, 39244k reserved, 956k da
ta, 336k init, 2752448k highmem)
virtual kernel memory layout:
fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc04a6000 - 0xc04fa000 ( 336 kB)
.data : 0xc03af3bc - 0xc049e7b4 ( 956 kB)
.text : 0xc0100000 - 0xc03af3bc (2748 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3618.86 BogoMIPS (lpj=7237725)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001
00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 0000000
0 00000001
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
CPU0: AMD Dual Core AMD Opteron(tm) Processor 275 stepping 02
Total of 1 processors activated (3618.86 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1189k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfa240, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:02:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: Power Resource [ISAV] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
libata version 2.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
pnp: 00:00: ioport range 0x1400-0x147f has been reserved
pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:00: ioport range 0x1800-0x187f has been reserved
pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
PCI: Bridge: 0000:00:0a.0
IO window: c000-cfff
MEM window: fb000000-fcffffff
PREFETCH window: e2000000-e20fffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: f8000000-faffffff
PREFETCH window: f0000000-f7ffffff
PCI: Setting latency timer of device 0000:00:0a.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1104537740.684:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.8)
fuse distribution version: 2.6.1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered

ciao

Alex

2000k.sie · 11.03.2008

Uff.

Das ist natürlich harter Stoff.
So gut kenne ich mich nicht aus.

Tut mir leid - aber da muss ich leider passen.

Wäre es bei Windows geblieben, hätte ich gesagt, dass du den MultiCore-Kernel nachinstallieren musst - danach wäre es aber (ohne dass ich im Internet suche) bei mir auch zu Ende.

Sorry. Ich hoffe, du bekommst das noch gelöst.

PS: Schreib' doch einfach mal an den GigaByte-Support. Vielleicht haben die ja doch noch irgendein nicht releastes BIOS rumfliegen.
VIelleicht erwähnst du in der Mail direkt auch mal, dass das BIOS zwar DUAL-CORE-fähig ist, dein Prozessor aber dennoch nicht richtig funktioniert.
Oder gibt es vielleicht irgendein baugleiches Board, dessen BIOS du dir aufspielen könntest?

ALT255@Seti · 11.03.2008

Hi ich kann am We mal nen dump bei meinem Ga M61P-S3 machen ist gerade nen Phenom 9500 drauf, ob man da den Multicore support deaktivieren kann weiss ich nicht.

Opteron · 12.03.2008

ALT255@Seti schrieb:
Hi ich kann am We mal nen dump bei meinem Ga M61P-S3 machen ist gerade nen Phenom 9500 drauf, ob man da den Multicore support deaktivieren kann weiss ich nicht.

Hmm Phenom ... ob da schon wieder was anders ist, als beim X2 ?

Naja vielleicht reicht das schon, ich brauch nur die Info, wie man das 2te Apic anspricht, wenn es noch ein 3tes und 4tes gibt, sollte das egal sein

Aber falls noch jemand einen X2 Dump machen könnte, wärs super, vielleicht reicht es schon, wenn ich das einfach übernehme.

@2000k.sie:
Das wird nix werden, Gigabyte hat meine (neuere) Beta Version nach ca. nem Jahr wieder vom Server genommen, jetzt gibts da nur noch ne ältere. Baugleiche boards gibts nicht, da hat kein einziger Hersteller X2 fähige BIOSe rausgebracht.

ciao

Alex

[ 0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] Command line: root=UUID=424037A340379C9B loop=/ubuntu/disks/root.disk ro acpi_no_auto_ssdt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000dfff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfff3000 - 00000000e0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 917488) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
[ 0.000000] end_pfn_map = 1179648
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F66D0 checksum 0
[ 0.000000] ACPI: RSDP 000F66D0, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT DFFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP DFFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT DFFF30C0, 4C15 (r1 NVIDIA AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS DFFF0000, 0040
[ 0.000000] ACPI: APIC DFFF7D00, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] CPU has 2 num_cores
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 917488) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1179648
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 160
[ 0.000000] 0: 256 -> 917488
[ 0.000000] 0: 1048576 -> 1179648
[ 0.000000] On node 0 totalpages: 1048464
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1209 pages reserved
[ 0.000000] DMA zone: 2735 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 899112 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 00000000dfff0000 - 00000000dfff3000
[ 0.000000] swsusp: Registered nosave memory region: 00000000dfff3000 - 00000000e0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000fec00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffff0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000ffff0000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031127
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=424037A340379C9B loop=/ubuntu/disks/root.disk ro acpi_no_auto_ssdt
[ 0.000000] ACPI: SSDT auto-load disabled
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 59.956784] time.c: Detected 1889.998 MHz processor.
[ 59.958883] Console: colour VGA+ 80x25
[ 59.958887] console [tty0] enabled
[ 59.963290] Checking aperture...
[ 59.963349] CPU 0: aperture @ e8000000 size 128 MB
[ 60.002661] Memory: 4116752k/4718592k available (2466k kernel code, 77104k reserved, 1309k data, 316k init)
[ 60.002777] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 60.082593] Calibrating delay using timer specific routine.. 3782.47 BogoMIPS (lpj=7564953)
[ 60.082739] Security Framework initialized
[ 60.082802] SELinux: Disabled at boot.
[ 60.082873] AppArmor: AppArmor initialized
[ 60.082934] Failure registering capabilities with primary security module.
[ 60.083314] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 60.085756] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 60.087037] Mount-cache hash table entries: 256
[ 60.087218] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 60.087282] CPU: L2 Cache: 1024K (64 bytes/line)
[ 60.087342] CPU 0/0 -> Node 0
[ 60.087417] SMP alternatives: switching to UP code
[ 60.087912] Freeing SMP alternatives: 24k freed
[ 60.088308] Early unpacking initramfs... done
[ 60.406599] ACPI: Core revision 20070126
[ 60.406706] ACPI: Looking for DSDT in initramfs... successfully read 22520 bytes from /DSDT.aml.
[ 60.406845] ACPI: Table DSDT replaced by host OS
[ 60.406991] ACPI: DSDT 00000000, 57F8 (r1 NVIDIA AWRDACPI 1000 INTL 20080514)
[ 60.450534] Using local APIC timer interrupts.
[ 60.503429] APIC timer calibration result 13124975
[ 60.503431] Detected 13.124 MHz APIC timer.
[ 60.503538] Brought up 1 CPUs
[ 60.503657] CPU0 attaching sched-domain:
[ 60.503659] domain 0: span 01
[ 60.503661] groups: 01
[ 60.503796] net_namespace: 120 bytes
[ 60.504262] Time: 23:28:43 Date: 05/25/08
[ 60.504342] NET: Registered protocol family 16
[ 60.504559] ACPI: bus type pci registered
[ 60.504678] PCI: Using configuration type 1
[ 60.506017] ACPI: EC: Look up EC in DSDT
[ 60.511765] ACPI: Interpreter enabled
[ 60.511825] ACPI: (supports S0 S1 S3 S4 S5)
[ 60.512108] ACPI: Using IOAPIC for interrupt routing
[ 60.520268] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 60.520977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 60.569836] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 60.570683] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 60.571537] ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 60.572292] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 60.573046] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 60.573799] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 60.574550] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 60.575302] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 60.576056] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 60.576809] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 60.577657] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 60.578411] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 60.579164] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 60.580021] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 60.580876] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 60.581733] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 60.582598] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 60.583067] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 60.583539] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 60.583964] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 60.584324] ACPI: PCI Interrupt Link [APC5] (IRQs *16)
[ 60.584712] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 60.585270] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0
[ 60.585827] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 60.586384] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 60.586941] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 60.587544] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 60.588102] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 60.588659] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 60.589267] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 60.589876] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 60.590484] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 60.590997] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 60.591081] pnp: PnP ACPI init
[ 60.591145] ACPI: bus type pnp registered
[ 60.595350] pnpacpi: exceeded the max number of mem resources: 12
[ 60.595476] pnp: PnP ACPI: found 11 devices
[ 60.595536] ACPI: ACPI bus type pnp unregistered
[ 60.595783] PCI: Using ACPI for IRQ routing
[ 60.595844] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 60.595925] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[ 60.611355] NET: Registered protocol family 8
[ 60.611415] NET: Registered protocol family 20
[ 60.611529] agpgart: Detected AGP bridge 0
[ 60.611592] agpgart: Setting up Nforce3 AGP.
[ 60.617539] agpgart: AGP aperture is 128M @ 0xe8000000
[ 60.617623] PCI-DMA: using GART IOMMU.
[ 60.617684] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 60.617985] AppArmor: AppArmor Filesystem Enabled
[ 60.619331] Time: tsc clocksource has been installed.
[ 60.631348] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 60.631412] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 60.631475] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 60.631538] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 60.631601] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 60.631664] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 60.631728] system 00:01: iomem range 0x0-0x0 could not be reserved
[ 60.631794] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 60.633264] system 00:02: ioport range 0x200-0x27f has been reserved
[ 60.633327] system 00:02: ioport range 0x290-0x30f has been reserved
[ 60.633390] system 00:02: ioport range 0x290-0x297 has been reserved
[ 60.633460] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
[ 60.633539] system 00:0a: iomem range 0xce800-0xcffff has been reserved
[ 60.633602] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[ 60.633666] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[ 60.633729] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[ 60.633793] system 00:0a: iomem range 0xdfff0000-0xdfffffff could not be reserved
[ 60.633869] system 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved
[ 60.633944] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 60.634008] system 00:0a: iomem range 0x100000-0xdffeffff could not be reserved
[ 60.634083] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 60.634158] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 60.634233] system 00:0a: iomem range 0xfefff000-0xfeffffff has been reserved
[ 60.634297] system 00:0a: iomem range 0xfff80000-0xfff80fff has been reserved
[ 60.634696] PCI: Bridge: 0000:00:0a.0
[ 60.634756] IO window: c000-cfff
[ 60.634816] MEM window: fb000000-fcffffff
[ 60.634876] PREFETCH window: e2000000-e20fffff
[ 60.634937] PCI: Bridge: 0000:00:0b.0
[ 60.634995] IO window: disabled.
[ 60.635056] MEM window: f8000000-faffffff
[ 60.635116] PREFETCH window: f0000000-f7ffffff
[ 60.635182] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 60.635224] NET: Registered protocol family 2
[ 60.667383] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 60.668577] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 60.673149] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 60.673820] TCP: Hash tables configured (established 524288 bind 65536)
[ 60.673883] TCP reno registered
[ 60.683353] checking if image is initramfs... it is
[ 61.134569] Switched to high resolution mode on CPU 0
[ 61.305406] Freeing initrd memory: 7525k freed
[ 61.310303] audit: initializing netlink socket (disabled)
[ 61.310374] audit(1211758123.316:1): initialized
[ 61.312185] VFS: Disk quotas dquot_6.5.1
[ 61.312305] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 61.312471] io scheduler noop registered
[ 61.312531] io scheduler anticipatory registered
[ 61.312591] io scheduler deadline registered
[ 61.312733] io scheduler cfq registered (default)
[ 61.313482] Boot video device is 0000:02:00.0
[ 61.337246] Real Time Clock Driver v1.12ac
[ 61.337385] Linux agpgart interface v0.102
[ 61.337445] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 61.338379] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 61.338514] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 61.338658] PNP: PS/2 Controller [PNP0303

S2K] at 0x60,0x64 irq 1
[ 61.338721] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 61.339283] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 61.346337] mice: PS/2 mouse device common for all mice
[ 61.346426] cpuidle: using governor ladder
[ 61.346486] cpuidle: using governor menu
[ 61.346661] NET: Registered protocol family 1
[ 61.346764] registered taskstats version 1
[ 61.346917] Magic number: 8:240:505
[ 61.346977] hash matches device i8042
[ 61.347148] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 61.347225] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 61.347286] EDD information not available.
[ 61.347351] Freeing unused kernel memory: 316k freed
[ 61.374183] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 61.511706] fuse init (API version 7.9)
[ 61.524457] ACPI: Fan [FAN] (on)
[ 61.529368] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 61.530807] ACPI: Thermal Zone [THRM] (25 C)
[ 62.177349] usbcore: registered new interface driver usbfs
[ 62.177433] usbcore: registered new interface driver hub
[ 62.189206] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 62.189296] ACPI: Unable to derive IRQ for device 0000:00:05.0
[ 62.189357] ACPI: PCI Interrupt 0000:00:05.0[A]: no GSI - using IRQ 10
[ 62.189469] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 62.196953] usbcore: registered new device driver usb
[ 62.208939] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 62.230346] SCSI subsystem initialized
[ 62.268807] libata version 3.00 loaded.
[ 62.417374] Floppy drive(s): fd0 is 1.44M
[ 62.436418] FDC 0 is a post-1991 82077
[ 62.708501] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:0d:61:3d:15:5a
[ 62.708583] forcedeth 0000:00:05.0: timirq lnktim desc-v1
[ 62.709082] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 62.709149] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
[ 62.709438] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 62.709444] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 62.709708] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 62.709797] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfd003000
[ 62.766177] usb usb1: configuration #1 chosen from 1 choice
[ 62.766262] hub 1-0:1.0: USB hub found
[ 62.766328] hub 1-0:1.0: 3 ports detected
[ 62.868285] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 62.868355] ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
[ 62.868637] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 62.868643] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 62.868751] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 62.868843] ohci_hcd 0000:00:02.1: irq 22, io mem 0xfd004000
[ 62.925865] usb usb2: configuration #1 chosen from 1 choice
[ 62.925948] hub 2-0:1.0: USB hub found
[ 62.926013] hub 2-0:1.0: 3 ports detected
[ 63.027884] ACPI: Unable to derive IRQ for device 0000:00:02.2
[ 63.027948] ACPI: PCI Interrupt 0000:00:02.2[C]: no GSI - using IRQ 4
[ 63.028170] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 63.028176] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 63.028287] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 63.028387] ehci_hcd 0000:00:02.2: debug port 1
[ 63.028448] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 63.028462] ehci_hcd 0000:00:02.2: irq 4, io mem 0xfd005000
[ 63.171413] usb 1-3: new full speed USB device using ohci_hcd and address 2
[ 63.183395] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 63.183633] usb usb3: configuration #1 chosen from 1 choice
[ 63.183732] hub 3-0:1.0: USB hub found
[ 63.183798] hub 3-0:1.0: 6 ports detected
[ 63.186974] irq 4: nobody cared (try booting with the "irqpoll" option)
[ 63.187039] Pid: 0, comm: swapper Not tainted 2.6.24-16-generic #1
[ 63.187102]
[ 63.187102] Call Trace:
[ 63.187214] <IRQ> [<ffffffff8027ad8e>] __report_bad_irq+0x1e/0x80
[ 63.187328] [<ffffffff8027b09d>] note_interrupt+0x2ad/0x2e0
[ 63.187391] [<ffffffff8027bbe1>] handle_fasteoi_irq+0xa1/0x110
[ 63.187456] [<ffffffff8020ef6b>] do_IRQ+0x7b/0x100
[ 63.187517] [<ffffffff8020b390>] default_idle+0x0/0x40
[ 63.187578] [<ffffffff8020b390>] default_idle+0x0/0x40
[ 63.187640] [<ffffffff8020c891>] ret_from_intr+0x0/0xa
[ 63.187701] <EOI> [<ffffffff8020b3b9>] default_idle+0x29/0x40
[ 63.187809] [<ffffffff8020b43f>] cpu_idle+0x6f/0xc0
[ 63.187871] [<ffffffff805d6bb5>] start_kernel+0x2b5/0x340
[ 63.187934] [<ffffffff805d612e>] _sinittext+0x12e/0x140
[ 63.187995]
[ 63.188051] handlers:
[ 63.188107] [<ffffffff88043300>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 63.188270] Disabling IRQ #4
[ 63.287853] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 63.287945] ACPI: Unable to derive IRQ for device 0000:01:0b.0
[ 63.288008] ACPI: PCI Interrupt 0000:01:0b.0[A]: no GSI - using IRQ 11
[ 63.288612] eth1: RTL8169s at 0xffffc2000062c000, 00:0d:61:3d:15:0a, XID 00800000 IRQ 11
[ 63.291892] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 63.296927] ACPI: Unable to derive IRQ for device 0000:01:0e.0
[ 63.296991] ACPI: PCI Interrupt 0000:01:0e.0[A]: no GSI - using IRQ 3
[ 63.347352] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[3] MMIO=[fc004000-fc0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 63.395309] pata_amd 0000:00:08.0: version 0.3.10
[ 63.395505] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 63.401658] scsi0 : pata_amd
[ 63.404723] scsi1 : pata_amd
[ 63.405986] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 63.406055] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 63.417600] irq 22: nobody cared (try booting with the "irqpoll" option)
[ 63.417666] Pid: 2313, comm: udevd Not tainted 2.6.24-16-generic #1
[ 63.417728]
[ 63.417729] Call Trace:
[ 63.417840] <IRQ> [<ffffffff8027ad8e>] __report_bad_irq+0x1e/0x80
[ 63.417955] [<ffffffff8027b09d>] note_interrupt+0x2ad/0x2e0
[ 63.418019] [<ffffffff8027bbe1>] handle_fasteoi_irq+0xa1/0x110
[ 63.418083] [<ffffffff8020ef6b>] do_IRQ+0x7b/0x100
[ 63.418145] [<ffffffff8020c891>] ret_from_intr+0x0/0xa
[ 63.418209] [<ffffffff80462898>] _spin_unlock_irqrestore+0x8/0x10
[ 63.418276] [<ffffffff8811dec0>] hci1394hci_irq_handler+0x50/0x910
[ 63.418341] [<ffffffff8027a094>] handle_IRQ_event+0x34/0x70
[ 63.418404] [<ffffffff8027bbca>] handle_fasteoi_irq+0x8a/0x110
[ 63.418467] [<ffffffff8020ef6b>] do_IRQ+0x7b/0x100
[ 63.419936] [<ffffffff8020c891>] ret_from_intr+0x0/0xa
[ 63.419996] <EOI> [<ffffffff8029acc9>] free_page_and_swap_cache+0x9/0x40
[ 63.420108] [<ffffffff80292760>] free_pgd_range+0x570/0x5a0
[ 63.420173] [<ffffffff80292a33>] free_pgtables+0xd3/0xf0
[ 63.420236] [<ffffffff80294053>] exit_mmap+0x93/0x100
[ 63.420299] [<ffffffff8023aad6>] mmput+0x26/0xb0
[ 63.420360] [<ffffffff80240d60>] do_exit+0x1c0/0x940
[ 63.420422] [<ffffffff802ae670>] __fput+0x150/0x1e0
[ 63.420485] [<ffffffff8024150c>] do_group_exit+0x2c/0x80
[ 63.420547] [<ffffffff8020c37e>] system_call+0x7e/0x83
[ 63.420609]
[ 63.420665] handlers:
[ 63.420721] [<ffffffff88043300>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 63.420884] Disabling IRQ #22
[ 63.583578] irq 3: nobody cared (try booting with the "irqpoll" option)
[ 63.583646] Pid: 0, comm: swapper Not tainted 2.6.24-16-generic #1
[ 63.583708]
[ 63.583709] Call Trace:
[ 63.583820] <IRQ> [<ffffffff80256d6e>] hrtimer_start+0xee/0x170
[ 63.583934] [<ffffffff8027ad8e>] __report_bad_irq+0x1e/0x80
[ 63.583997] [<ffffffff8027b09d>] note_interrupt+0x2ad/0x2e0
[ 63.584060] [<ffffffff8027bbe1>] handle_fasteoi_irq+0xa1/0x110
[ 63.584124] [<ffffffff8020ef6b>] do_IRQ+0x7b/0x100
[ 63.584185] [<ffffffff8020b390>] default_idle+0x0/0x40
[ 63.584247] [<ffffffff8020b390>] default_idle+0x0/0x40
[ 63.584308] [<ffffffff8020c891>] ret_from_intr+0x0/0xa
[ 63.584369] <EOI> [<ffffffff8020b3b9>] default_idle+0x29/0x40
[ 63.584476] [<ffffffff8020b43f>] cpu_idle+0x6f/0xc0
[ 63.584539] [<ffffffff805d6bb5>] start_kernel+0x2b5/0x340
[ 63.584601] [<ffffffff805d612e>] _sinittext+0x12e/0x140
[ 63.584662]
[ 63.584718] handlers:
[ 63.584774] [<ffffffff8811de70>] (ohci_irq_handler+0x0/0x910 [ohci1394])
[ 63.584925] Disabling IRQ #3
[ 63.742965] ata1.00: ATA-6: ST3200822A, 3.01, max UDMA/100
[ 63.743028] ata1.00: 390721968 sectors, multi 16: LBA48
[ 63.744047] ata1.01: ATA-5: WDC WD800BB-40BSA0, 12.08C12, max UDMA/100
[ 63.744111] ata1.01: 156301488 sectors, multi 16: LBA
[ 63.758857] ata1.00: configured for UDMA/100
[ 63.775574] ata1.01: configured for UDMA/100
[ 64.094380] ata2.00: ATAPI: _NEC DVD_RW ND-3520AW, 3.07, max UDMA/33
[ 64.265957] ata2.00: configured for UDMA/33
[ 64.266098] scsi 0:0:0:0: Direct-Access ATA ST3200822A 3.01 PQ: 0 ANSI: 5
[ 64.266486] scsi 0:0:1:0: Direct-Access ATA WDC WD800BB-40BS 12.0 PQ: 0 ANSI: 5
[ 64.269504] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3520AW 3.07 PQ: 0 ANSI: 5
[ 64.277963] Driver 'sd' needs updating - please use bus_type methods
[ 64.278098] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 64.278171] sd 0:0:0:0: [sda] Write Protect is off
[ 64.278232] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 64.278246] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 64.278359] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 64.278429] sd 0:0:0:0: [sda] Write Protect is off
[ 64.278490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 64.278502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 64.278580] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 64.290563] sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 64.337630] sd 0:0:0:0: [sda] Attached SCSI disk
[ 64.338545] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 64.338618] sd 0:0:1:0: [sdb] Write Protect is off
[ 64.338679] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 64.338693] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 64.338802] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 64.338873] sd 0:0:1:0: [sdb] Write Protect is off
[ 64.338934] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 64.338947] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 64.339025] sdb: sdb1 sdb2 sdb3 sdb4
[ 64.378640] sdb4: <solaris: [s0] sdb5 [s1] sdb6 [s2] sdb7 [s8] sdb8 >
[ 64.379186] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 64.387836] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 64.387915] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 64.387988] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 64.388715] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 64.388781] Uniform CD-ROM driver Revision: 3.20
[ 64.388875] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 65.764180] loop: module loaded
[ 65.785982] kjournald starting. Commit interval 5 seconds
[ 65.786058] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.163754] ohci_hcd 0000:00:02.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 76.168480] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 76.168828] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000
[ 76.187527] input: Power Button (FF) as /devices/virtual/input/input2
[ 76.203429] ACPI: Power Button (FF) [PWRF]
[ 76.203589] input: Power Button (CM) as /devices/virtual/input/input3
[ 76.219412] ACPI: Power Button (CM) [PWRB]
[ 78.340172] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 78.468012] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 78.851465] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 79.291513] gameport: EMU10K1 is pci0000:01:07.1/gameport0, io 0xc400, speed 1126kHz
[ 79.461426] nvidia: module license 'NVIDIA' taints kernel.
[ 79.975055] ACPI: Unable to derive IRQ for device 0000:01:07.0
[ 79.975122] ACPI: PCI Interrupt 0000:01:07.0[A]: no GSI - using IRQ 11
[ 80.017017] ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 21
[ 80.017094] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCZ] -> GSI 21 (level, low) -> IRQ 21
[ 80.017404] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 80.337111] intel8x0_measure_ac97_clock: measured 53717 usecs
[ 80.337179] intel8x0: clocking to 47456
[ 80.360156] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 80.360231] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
[ 80.360674] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008
[ 80.399031] irq 11: nobody cared (try booting with the "irqpoll" option)
[ 80.399101] Pid: 3416, comm: udevd Tainted: P 2.6.24-16-generic #1
[ 80.399164]
[ 80.399165] Call Trace:
[ 80.399276] <IRQ> [<ffffffff8027ad8e>] __report_bad_irq+0x1e/0x80
[ 80.399401] [<ffffffff8027b09d>] note_interrupt+0x2ad/0x2e0
[ 80.399467] [<ffffffff8027bbe1>] handle_fasteoi_irq+0xa1/0x110
[ 80.399533] [<ffffffff8020ef6b>] do_IRQ+0x7b/0x100
[ 80.399596] [<ffffffff8020c891>] ret_from_intr+0x0/0xa
[ 80.399657] <EOI>
[ 80.399763] handlers:
[ 80.399819] [<ffffffff88b04c60>] (snd_emu10k1_interrupt+0x0/0x5c0 [snd_emu10k1])
[ 80.399989] Disabling IRQ #11
[ 81.471305] lp: driver loaded but no devices found
[ 81.979600] EXT3 FS on loop0, internal journal
[ 86.240642] Adding 390616k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:211 across:51343436k
[ 86.617851] ip_tables: (C) 2000-2006 Netfilter Core Team

Piloboy · 13.03.2008

Brauchst du nen richtiges dump oder reicht dir das dmesg, sonst must ich nach nen Tool suchen.

Edit

Also ich habe nun von meinen ACPI Dumpfiles hier, sind im Binärformat, wenn du die haben möchtest dann lade ich die hoch.
Den dmesg poste ich mal hier

Linux version 2.6.23-gentoo-r8 (root@ivan) (gcc version 4.1.2 (Gentoo 4.1.2)) #1 SMP PREEMPT Fri Feb 22 21:44:22 CET 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f4020
Entering add_active_range(0, 0, 262128) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 262128
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 262128
On node 0 totalpages: 262128
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 255 pages used for memmap
HighMem zone: 32497 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
DMI 2.2 present.
ACPI: RSDP 000F81B0, 0014 (r0 Nvidia)
ACPI: RSDT 3FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 3FFF3180, 6218 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 3FFF0000, 0040
ACPI: SSDT 3FFF94C0, 01C4 (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: MCFG 3FFF9700, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 3FFF9400, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:11 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:11 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order. Total pages: 260081
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda3 vga=791
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c064f000 soft=c062f000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2009.280 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1030936k/1048512k available (4009k kernel code, 16876k reserved, 999k data, 260k init, 131008k highmem)
virtual kernel memory layout:
fixmap : 0xffe15000 - 0xfffff000 (1960 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc05eb000 - 0xc062c000 ( 260 kB)
.data : 0xc04ea776 - 0xc05e449c ( 999 kB)
.text : 0xc0100000 - 0xc04ea776 (4009 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4020.47 BogoMIPS (lpj=20102371)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0650000 soft=c0630000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.62 BogoMIPS (lpj=20093109)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Total of 2 processors activated (8039.09 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 2 CPUs

Opteron · 14.03.2008

Piloboy schrieb:
Brauchst du nen richtiges dump oder reicht dir das dmesg, sonst must ich nach nen Tool suchen.

Edit

Also ich habe nun von meinen ACPI Dumpfiles hier, sind im Binärformat, wenn du die haben möchtest dann lade ich die hoch.

Hiho,

jo die dumpfiles wären von Nöten, lade die bitte hoch

Das dmesg ist ja nur das Ergebnis, aber schon mal interessant zur Ursachenforschung

Noch ne Frage: Welches board und CPU ist das ?

ciao

Alex

Piloboy · 15.03.2008

X2 3800+ EE auf einem DFI Infinity nforce4 Ultra Board.
Link kommt noch.

Edit
www.piloboy.de/temp/dump

Opteron · 27.05.2008

Piloboy schrieb:
X2 3800+ EE auf einem DFI Infinity nforce4 Ultra Board.
Link kommt noch.

Edit
www.piloboy.de/temp/dump

Hihi,

hatte leider die letzte Zeit keine Lust/Zeit für das Problem, ein Kern reicht ja allgemein

Aber da jetzt wieder ein race ansteht, würde ich gerne den 2.Kern aktivieren

Dein dump bringt mich leider nicht recht viel weiter, was ist das für ein Format ? Könntest Du ne Binärdatei (aml / asl) zum runterladen von deinem APIC @ 0x3fff9400 anfertigen ?
An dem oder an meinem MADT (hast Du nicht) liegts, vermute ich schwer.

Nochmals Danke für die Umstände

ciao

Alex

P.S:
Hier hab ich mal spasseshalber probiert einen DSDT eines DFI boards zu laden. Das bringt als Unterschied nur ein falsches IRQ routing (eben das routing des DFI boards), außer Kernel Panic und dan amüsanten Fehlermeldungen hilft das nicht weiter

[ 0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] Command line: root=UUID=424037A340379C9B loop=/ubuntu/disks/root.disk ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000dfff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfff3000 - 00000000e0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 917488) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
[ 0.000000] end_pfn_map = 1179648
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F66D0 checksum 0
[ 0.000000] ACPI: RSDP 000F66D0, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT DFFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP DFFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT DFFF30C0, 4C15 (r1 NVIDIA AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS DFFF0000, 0040
[ 0.000000] ACPI: APIC DFFF7D00, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] CPU has 2 num_cores
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 917488) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1179648
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 160
[ 0.000000] 0: 256 -> 917488
[ 0.000000] 0: 1048576 -> 1179648
[ 0.000000] On node 0 totalpages: 1048464
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1209 pages reserved
[ 0.000000] DMA zone: 2735 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 899112 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 00000000dfff0000 - 00000000dfff3000
[ 0.000000] swsusp: Registered nosave memory region: 00000000dfff3000 - 00000000e0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000fec00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffff0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000ffff0000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031127
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=424037A340379C9B loop=/ubuntu/disks/root.disk ro
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 49.414974] time.c: Detected 1890.003 MHz processor.
[ 49.417075] Console: colour VGA+ 80x25
[ 49.417078] console [tty0] enabled
[ 49.421420] Checking aperture...
[ 49.421479] CPU 0: aperture @ e8000000 size 128 MB
[ 49.460794] Memory: 4116752k/4718592k available (2466k kernel code, 77104k reserved, 1309k data, 316k init)
[ 49.460910] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 49.540782] Calibrating delay using timer specific routine.. 3782.47 BogoMIPS (lpj=7564959)
[ 49.540928] Security Framework initialized
[ 49.540992] SELinux: Disabled at boot.
[ 49.541062] AppArmor: AppArmor initialized
[ 49.541124] Failure registering capabilities with primary security module.
[ 49.541503] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 49.543946] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 49.545229] Mount-cache hash table entries: 256
[ 49.545410] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 49.545474] CPU: L2 Cache: 1024K (64 bytes/line)
[ 49.545535] CPU 0/0 -> Node 0
[ 49.545610] SMP alternatives: switching to UP code
[ 49.546105] Freeing SMP alternatives: 24k freed
[ 49.546501] Early unpacking initramfs... done
[ 49.864793] ACPI: Core revision 20070126
[ 49.864900] ACPI: Looking for DSDT in initramfs... successfully read 22520 bytes from /DSDT.aml.
[ 49.865040] ACPI: Table DSDT replaced by host OS
[ 49.865186] ACPI: DSDT 00000000, 57F8 (r1 NVIDIA AWRDACPI 1000 INTL 20080514)
[ 49.865347] ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"<6>Using local APIC timer interrupts.
[ 49.961675] APIC timer calibration result 13125011
[ 49.961677] Detected 13.125 MHz APIC timer.
[ 49.961784] Brought up 1 CPUs
[ 49.961903] CPU0 attaching sched-domain:
[ 49.961906] domain 0: span 01
[ 49.961907] groups: 01
[ 49.962042] net_namespace: 120 bytes
[ 49.962507] Time: 22:58:59 Date: 05/25/08
[ 49.962588] NET: Registered protocol family 16
[ 49.962805] ACPI: bus type pci registered
[ 49.962924] PCI: Using configuration type 1
[ 49.964263] ACPI: EC: Look up EC in DSDT
[ 49.970010] ACPI: Interpreter enabled
[ 49.970071] ACPI: (supports S0 S1 S3 S4 S5)
[ 49.970354] ACPI: Using IOAPIC for interrupt routing
[ 49.978512] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 49.979222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 50.028035] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 50.028883] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 50.029737] ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 50.030493] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 50.031247] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 50.032000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 50.032752] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 50.033503] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 50.034257] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 50.035010] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 50.035859] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 50.036613] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 50.037366] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 50.038223] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 50.039077] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 50.039934] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 50.040799] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 50.041268] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 50.041740] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 50.042165] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 50.042525] ACPI: PCI Interrupt Link [APC5] (IRQs *16)
[ 50.042913] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 50.043470] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0
[ 50.044027] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 50.044584] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[ 50.045141] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 50.045745] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 50.046302] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 50.046860] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 50.047468] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 50.048076] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 50.048684] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 50.049198] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 50.049282] pnp: PnP ACPI init
[ 50.049346] ACPI: bus type pnp registered
[ 50.053550] pnpacpi: exceeded the max number of mem resources: 12
[ 50.053675] pnp: PnP ACPI: found 11 devices
[ 50.053735] ACPI: ACPI bus type pnp unregistered
[ 50.053982] PCI: Using ACPI for IRQ routing
[ 50.054043] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 50.054124] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[ 50.069604] NET: Registered protocol family 8
[ 50.069664] NET: Registered protocol family 20
[ 50.069777] agpgart: Detected AGP bridge 0
[ 50.069839] agpgart: Setting up Nforce3 AGP.
[ 50.075796] agpgart: AGP aperture is 128M @ 0xe8000000
[ 50.075880] PCI-DMA: using GART IOMMU.
[ 50.075940] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 50.076240] AppArmor: AppArmor Filesystem Enabled
[ 50.077579] Time: tsc clocksource has been installed.
[ 50.089596] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 50.089660] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 50.089723] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 50.089786] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 50.089849] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 50.089912] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 50.089976] system 00:01: iomem range 0x0-0x0 could not be reserved
[ 50.090042] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 50.091509] system 00:02: ioport range 0x200-0x27f has been reserved
[ 50.091572] system 00:02: ioport range 0x290-0x30f has been reserved
[ 50.091635] system 00:02: ioport range 0x290-0x297 has been reserved
[ 50.091705] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
[ 50.091784] system 00:0a: iomem range 0xce800-0xcffff has been reserved
[ 50.091847] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[ 50.091911] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[ 50.091975] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[ 50.092038] system 00:0a: iomem range 0xdfff0000-0xdfffffff could not be reserved
[ 50.092114] system 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved
[ 50.092189] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 50.092253] system 00:0a: iomem range 0x100000-0xdffeffff could not be reserved
[ 50.092328] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 50.092403] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 50.092478] system 00:0a: iomem range 0xfefff000-0xfeffffff has been reserved
[ 50.092542] system 00:0a: iomem range 0xfff80000-0xfff80fff has been reserved
[ 50.092942] PCI: Bridge: 0000:00:0a.0
[ 50.093001] IO window: c000-cfff
[ 50.093061] MEM window: fb000000-fcffffff
[ 50.093121] PREFETCH window: e2000000-e20fffff
[ 50.093182] PCI: Bridge: 0000:00:0b.0
[ 50.093240] IO window: disabled.
[ 50.093301] MEM window: f8000000-faffffff
[ 50.093361] PREFETCH window: f0000000-f7ffffff
[ 50.093428] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 50.093469] NET: Registered protocol family 2
[ 50.125633] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 50.126829] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 50.131403] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 50.132073] TCP: Hash tables configured (established 524288 bind 65536)
[ 50.132137] TCP reno registered
[ 50.141603] checking if image is initramfs... it is
[ 50.592828] Switched to high resolution mode on CPU 0
[ 50.763619] Freeing initrd memory: 7525k freed
[ 50.768510] audit: initializing netlink socket (disabled)
[ 50.768587] audit(1211756339.316:1): initialized
[ 50.770397] VFS: Disk quotas dquot_6.5.1
[ 50.770517] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 50.770683] io scheduler noop registered
[ 50.770743] io scheduler anticipatory registered
[ 50.770803] io scheduler deadline registered
[ 50.770945] io scheduler cfq registered (default)
[ 50.771693] Boot video device is 0000:02:00.0
[ 50.795261] Real Time Clock Driver v1.12ac
[ 50.795403] Linux agpgart interface v0.102
[ 50.795464] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 50.796397] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 50.796931] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 50.797077] PNP: PS/2 Controller [PNP0303

S2K] at 0x60,0x64 irq 1
[ 50.797140] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 50.797859] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 50.808508] mice: PS/2 mouse device common for all mice
[ 50.808596] cpuidle: using governor ladder
[ 50.808656] cpuidle: using governor menu
[ 50.808836] NET: Registered protocol family 1
[ 50.808938] registered taskstats version 1
[ 50.809092] Magic number: 8:649:1008
[ 50.809154] hash matches device ttye7
[ 50.809218] hash matches device ttyba
[ 50.809380] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 50.809457] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 50.809519] EDD information not available.
[ 50.809584] Freeing unused kernel memory: 316k freed
[ 50.836422] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 50.892714] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 50.973599] fuse init (API version 7.9)
[ 50.986228] ACPI: Fan [FAN] (on)
[ 50.991096] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 50.992528] ACPI: Thermal Zone [THRM] (25 C)
[ 51.635280] usbcore: registered new interface driver usbfs
[ 51.635361] usbcore: registered new interface driver hub
[ 51.651202] usbcore: registered new device driver usb
[ 51.659224] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 51.659313] ACPI: Unable to derive IRQ for device 0000:00:05.0
[ 51.659375] ACPI: PCI Interrupt 0000:00:05.0[A]: no GSI - using IRQ 10
[ 51.659486] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 51.671176] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 51.699279] SCSI subsystem initialized
[ 51.739055] libata version 3.00 loaded.
[ 51.884983] Floppy drive(s): fd0 is 1.44M
[ 51.902623] FDC 0 is a post-1991 82077
[ 52.178769] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:0d:61:3d:15:5a
[ 52.178851] forcedeth 0000:00:05.0: timirq lnktim desc-v1
[ 52.179353] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 52.179420] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
[ 52.179712] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 52.179718] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 52.179980] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 52.180070] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfd003000
[ 52.236387] usb usb1: configuration #1 chosen from 1 choice
[ 52.236473] hub 1-0:1.0: USB hub found
[ 52.236539] hub 1-0:1.0: 3 ports detected
[ 52.338510] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 52.338579] ACPI: PCI Interrupt 0000:00:02.1 -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
[ 52.338859] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 52.338865] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 52.338973] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 52.339065] ohci_hcd 0000:00:02.1: irq 22, io mem 0xfd004000
[ 52.396107] usb usb2: configuration #1 chosen from 1 choice
[ 52.396188] hub 2-0:1.0: USB hub found
[ 52.396253] hub 2-0:1.0: 3 ports detected
[ 52.498126] ACPI: Unable to derive IRQ for device 0000:00:02.2
[ 52.498189] ACPI: PCI Interrupt 0000:00:02.2[C]: no GSI - using IRQ 4
[ 52.498413] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 52.498419] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 52.498531] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 52.498631] ehci_hcd 0000:00:02.2: debug port 1
[ 52.498693] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 52.498706] ehci_hcd 0000:00:02.2: irq 4, io mem 0xfd005000
[ 52.641652] usb 1-3: new full speed USB device using ohci_hcd and address 2
[ 52.653631] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 52.653868] usb usb3: configuration #1 chosen from 1 choice
[ 52.653965] hub 3-0:1.0: USB hub found
[ 52.654031] hub 3-0:1.0: 6 ports detected
[ 52.657214] irq 4: nobody cared (try booting with the "irqpoll" option)
[ 52.657279] Pid: 0, comm: swapper Not tainted 2.6.24-16-generic #1
[ 52.657341]
[ 52.657341] Call Trace:
[ 52.657453] <IRQ> [<ffffffff8027ad8e>] __report_bad_irq+0x1e/0x80
[ 52.657568] [<ffffffff8027b09d>] note_interrupt+0x2ad/0x2e0
[ 52.657631] [<ffffffff8027bbe1>] handle_fasteoi_irq+0xa1/0x110
[ 52.657695] [<ffffffff8020ef6b>] do_IRQ+0x7b/0x100
[ 52.657757] [<ffffffff8020b390>] default_idle+0x0/0x40
[ 52.657818] [<ffffffff8020b390>] default_idle+0x0/0x40
[ 52.657880] [<ffffffff8020c891>] ret_from_intr+0x0/0xa
[ 52.657940] <EOI> [<ffffffff8020b3b9>] default_idle+0x29/0x40
[ 52.658048] [<ffffffff8020b43f>] cpu_idle+0x6f/0xc0
[ 52.658111] [<ffffffff805d6bb5>] start_kernel+0x2b5/0x340
[ 52.658174] [<ffffffff805d612e>] _sinittext+0x12e/0x140
[ 52.658235]
[ 52.658290] handlers:
[ 52.658347] [<ffffffff88043300>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 52.658510] Disabling IRQ #4
[ 52.758074] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 52.758165] ACPI: Unable to derive IRQ for device 0000:01:0b.0
[ 52.758228] ACPI: PCI Interrupt 0000:01:0b.0[A]: no GSI - using IRQ 11
[ 52.758839] eth1: RTL8169s at 0xffffc2000062c000, 00:0d:61:3d:15:0a, XID 00800000 IRQ 11
[ 52.762039] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 52.767031] ACPI: Unable to derive IRQ for device 0000:01:0e.0
[ 52.767096] ACPI: PCI Interrupt 0000:01:0e.0[A]: no GSI - using IRQ 3
[ 52.817457] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[3] MMIO=[fc004000-fc0047ff] Max Packet=[4096] IR/IT contexts=[4/8]
[ 52.873887] pata_amd 0000:00:08.0: version 0.3.10
[ 52.874072] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 52.878632] scsi0 : pata_amd
[ 52.885320] scsi1 : pata_amd
[ 52.886613] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 52.886682] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 52.890976] irq 22: nobody cared (try booting with the "irqpoll" option)
[ 52.891041] Pid: 2306, comm: modprobe Not tainted 2.6.24-16-generic #1
[ 52.891104]
[ 52.891104] Call Trace:
[ 52.891216] <IRQ> [<ffffffff8027ad8e>] __report_bad_irq+0x1e/0x80
[ 52.891330] [<ffffffff8027b09d>] note_interrupt+0x2ad/0x2e0
[ 52.891394] [<ffffffff8027bbe1>] handle_fasteoi_irq+0xa1/0x110
[ 52.891458] [<ffffffff8020ef6b>] do_IRQ+0x7b/0x100
[ 52.891520] [<ffffffff8020c891>] ret_from_intr+0x0/0xa
[ 52.891584] [<ffffffff80462898>] _spin_unlock_irqrestore+0x8/0x10
[ 52.891651] [<ffffffff8811dec0>] hci1394hci_irq_handler+0x50/0x910
[ 52.893123] [<ffffffff8027a094>] handle_IRQ_event+0x34/0x70
[ 52.893186] [<ffffffff8027bbca>] handle_fasteoi_irq+0x8a/0x110
[ 52.893249] [<ffffffff8020ef6b>] do_IRQ+0x7b/0x100
[ 52.893311] [<ffffffff8020c891>] ret_from_intr+0x0/0xa
[ 52.893372] <EOI>
[ 52.893472] handlers:
[ 52.893529] [<ffffffff88043300>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 52.893691] Disabling IRQ #22
[ 53.047986] irq 3: nobody cared (try booting with the "irqpoll" option)
[ 53.048054] Pid: 0, comm: swapper Not tainted 2.6.24-16-generic #1
[ 53.048116]
[ 53.048116] Call Trace:
[ 53.048228] <IRQ> [<ffffffff8027ad8e>] __report_bad_irq+0x1e/0x80
[ 53.048341] [<ffffffff8027b09d>] note_interrupt+0x2ad/0x2e0
[ 53.048405] [<ffffffff8027bbe1>] handle_fasteoi_irq+0xa1/0x110
[ 53.048469] [<ffffffff8020ef6b>] do_IRQ+0x7b/0x100
[ 53.048530] [<ffffffff8020b390>] default_idle+0x0/0x40
[ 53.048591] [<ffffffff8020b390>] default_idle+0x0/0x40
[ 53.048653] [<ffffffff8020c891>] ret_from_intr+0x0/0xa
[ 53.048713] <EOI> [<ffffffff8020b3b9>] default_idle+0x29/0x40
[ 53.048821] [<ffffffff8020b43f>] cpu_idle+0x6f/0xc0
[ 53.048883] [<ffffffff805d6bb5>] start_kernel+0x2b5/0x340
[ 53.048945] [<ffffffff805d612e>] _sinittext+0x12e/0x140
[ 53.049007]
[ 53.049062] handlers:
[ 53.049118] [<ffffffff8811de70>] (ohci_irq_handler+0x0/0x910 [ohci1394])
[ 53.049269] Disabling IRQ #3
[ 53.225163] ata1.00: ATA-6: ST3200822A, 3.01, max UDMA/100
[ 53.225226] ata1.00: 390721968 sectors, multi 16: LBA48
[ 53.226216] ata1.01: ATA-5: WDC WD800BB-40BSA0, 12.08C12, max UDMA/100
[ 53.226280] ata1.01: 156301488 sectors, multi 16: LBA
[ 53.241080] ata1.00: configured for UDMA/100
[ 53.257796] ata1.01: configured for UDMA/100
[ 53.576493] ata2.00: ATAPI: _NEC DVD_RW ND-3520AW, 3.07, max UDMA/33
[ 53.748170] ata2.00: configured for UDMA/33
[ 53.748310] scsi 0:0:0:0: Direct-Access ATA ST3200822A 3.01 PQ: 0 ANSI: 5
[ 53.748713] scsi 0:0:1:0: Direct-Access ATA WDC WD800BB-40BS 12.0 PQ: 0 ANSI: 5
[ 53.752809] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3520AW 3.07 PQ: 0 ANSI: 5
[ 53.761210] Driver 'sd' needs updating - please use bus_type methods
[ 53.761345] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 53.761417] sd 0:0:0:0: [sda] Write Protect is off
[ 53.761478] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 53.761492] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 53.761604] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 53.761674] sd 0:0:0:0: [sda] Write Protect is off
[ 53.761735] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 53.761747] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 53.761825] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 53.778774] sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 53.825830] sd 0:0:0:0: [sda] Attached SCSI disk
[ 53.825938] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 53.826010] sd 0:0:1:0: [sdb] Write Protect is off
[ 53.826071] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 53.826085] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 53.826194] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 53.826264] sd 0:0:1:0: [sdb] Write Protect is off
[ 53.826325] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 53.826338] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 53.826415] sdb: sdb1 sdb2 sdb3 sdb4
[ 53.854762] sdb4: <solaris: [s0] sdb5 [s1] sdb6 [s2] sdb7 [s8] sdb8 >
[ 53.855314] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 53.864209] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 53.864287] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 53.864361] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 53.864735] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 53.864799] Uniform CD-ROM driver Revision: 3.20
[ 53.864894] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 55.223716] loop: module loaded
[ 55.235437] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 55.235568] EXT3-fs: write access will be enabled during recovery.
[ 55.271679] kjournald starting. Commit interval 5 seconds
[ 55.271756] EXT3-fs: recovery complete.
[ 55.271933] EXT3-fs: mounted filesystem with ordered data mode.
[ 57.633999] ohci_hcd 0000:00:02.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 65.470464] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 65.470563] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000
[ 65.517420] input: Power Button (FF) as /devices/virtual/input/input3
[ 65.529901] ACPI: Power Button (FF) [PWRF]
[ 65.530058] input: Power Button (CM) as /devices/virtual/input/input4
[ 65.541910] ACPI: Power Button (CM) [PWRB]
[ 67.769540] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 67.802504] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 68.165986] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 68.664044] gameport: EMU10K1 is pci0000:01:07.1/gameport0, io 0xc400, speed 1127kHz
[ 68.842835] nvidia: module license 'NVIDIA' taints kernel.
[ 69.298003] ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 21
[ 69.298074] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCZ] -> GSI 21 (level, low) -> IRQ 21
[ 69.298355] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 69.619685] intel8x0_measure_ac97_clock: measured 53892 usecs
[ 69.619751] intel8x0: clocking to 47465
[ 69.620423] ACPI: Unable to derive IRQ for device 0000:01:07.0
[ 69.620486] ACPI: PCI Interrupt 0000:01:07.0[A]: no GSI - using IRQ 11
[ 69.651214] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 69.651289] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
[ 69.651735] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008
[ 69.862872] irq 11: nobody cared (try booting with the "irqpoll" option)
[ 69.862942] Pid: 3476, comm: udevd Tainted: P 2.6.24-16-generic #1
[ 69.863006]
[ 69.863006] Call Trace:
[ 69.863118] <IRQ> [<ffffffff8027ad8e>] __report_bad_irq+0x1e/0x80
[ 69.863243] [<ffffffff8027b09d>] note_interrupt+0x2ad/0x2e0
[ 69.863309] [<ffffffff8027bbe1>] handle_fasteoi_irq+0xa1/0x110
[ 69.863375] [<ffffffff8020ef6b>] do_IRQ+0x7b/0x100
[ 69.863438] [<ffffffff8020c891>] ret_from_intr+0x0/0xa
[ 69.863499] <EOI> [<ffffffff8032c7c0>] apparmor_inode_create+0x0/0x20
[ 69.863613] [<ffffffff802c2c1c>] alloc_inode+0xcc/0x200
[ 69.863676] [<ffffffff802c2b6b>] alloc_inode+0x1b/0x200
[ 69.863739] [<ffffffff802c3a05>] new_inode+0x25/0xd0
[ 69.863803] [<ffffffff802a182c>] shmem_get_inode+0x6c/0x240
[ 69.863868] [<ffffffff802a1a3c>] shmem_mknod+0x3c/0x120
[ 69.863933] [<ffffffff802b7206>] vfs_create+0x106/0x1a0
[ 69.863997] [<ffffffff802b9de7>] open_namei+0x477/0x710
[ 69.864066] [<ffffffff802ab76c>] do_filp_open+0x1c/0x50
[ 69.864134] [<ffffffff802ab3c7>] get_unused_fd_flags+0x77/0x120
[ 69.864200] [<ffffffff802ab7fa>] do_sys_open+0x5a/0xf0
[ 69.864263] [<ffffffff8020c37e>] system_call+0x7e/0x83
[ 69.864331]
[ 69.864386] handlers:
[ 69.864443] [<ffffffff88b0fc60>] (snd_emu10k1_interrupt+0x0/0x5c0 [snd_emu10k1])
[ 69.864612] Disabling IRQ #11
[ 71.763880] lp: driver loaded but no devices found
[ 72.275654] EXT3 FS on loop0, internal journal
[ 76.486775] Adding 390616k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:211 across:51343436k
[ 76.785875] ip_tables: (C) 2000-2006 Netfilter Core Team

Opteron · 28.05.2008

Soo Neuigkeiten ... also es liegt wohl definitiv am MADT bzw. APIC (je nachdem wie genannt wird), hab diesen Kernel-Bug Thread gefunden:

http://bugzilla.kernel.org/show_bug.cgi?id=7465

Da scheint es BIOSe zu geben, die haben 2 MADTs, was ziemlicher Blödsinn ist. Naja seit dem Bug kann man unter Linux jetzt auswählen, welcher MADTs jetzt wirklich benützt wird.

Ich brauch also nen funktionsfähigen MADT. Hab mir mal die Mühe gemacht und Piloboys ACPI Table händisch geparst, da passt soweit (natürlich) alles:

-----------
0000: 41 50 49 43 72 00 00 00 01 63 4e 76 69 64 69 61 APICr....cNvidia
0010: 41 57 52 44 41 43 50 49 31 2e 30 42 41 57 52 44 AWRDACPI1.0BAWRD
0020: 00 00 00 00 00 00 e0 fe 01 00 00 00 00 08 00 00 ................
0030: 01 00 00 00 00 08 01 01 01 00 00 00 01 0c 02 00 ................
0040: 00 00 c0 fe 00 00 00 00 02 0a 00 09 09 00 00 00 ................
0050: 0d 00 02 0a 00 0e 0e 00 00 00 05 00 02 0a 00 0f ................
0060: 0f 00 00 00 05 00 04 06 00 05 00 01 04 06 01 05 ................
0070: 00 01

Header
Signature 41 50 49 43 --4
Length 72 00 00 00 --4
Revision 01 --1
Checksum 63 --1
OEMID 4e 76 69 64 69 61 (nVIDIA) --6
OEM Table ID 41 57 52 44 41 43 50 49 (AWRDACPI) --8
OEM Revision 31 2e 30 42 (1.0B) --4
Creator ID 41 57 52 44 (AWRD) --4
Creator Revision 00 00 00 00 --4
Local APIC Address 00 00 e0 fe --4

Flags 01 00 00 00 --4 A one indicates that the system also has a PC-AT-compatible
dual-8259 setup. The 8259 vectors must be disabled (that is,
masked) when enabling the ACPI APIC operation.

APIC Structure[n]

CPU 0: (00 08 00 00 01 00 00 00)
00 -> Processor Local APIC
08 -> Lenghth = 8
00 -> ProcessorID
00 -> Processor's local APIC ID

01 00 00 00 Flags: Falls 0, dann CPU = Unusable
-----------
CPU 1: (00 08 01 01 01 00 00 00)
00 -> Processor Local APIC
08 -> Lenghth = 8
01 -> ProcessorID
01 -> Processor's local APIC ID
01 00 00 00 Flags: Falls 0, dann CPU = Unusable

----------
I/O APIC
01 -> I/O Apic
0c -> length = 12
02 -> I/O APIC ID
00 -> reserved

00 00 c0 fe -> I/O APIC Adress
00 00 00 00 -> The global system interrupt number where this I/O APIC’s
interrupt inputs start. The number of interrupt inputs is
determined by the I/O APIC’s Max Redir Entry register.

02 0a 00 09 09 00 00 00 05 00 Interrupt Source Override
---------
02 -> Interrupt Source Override
0a -> length = 10 byte
00 -> Constant, meaning ISA
09 -> Bus relevant interrupt source (IRQ)
09 00 00 00 -> Global system interrupt, that this bus-relative source will signal
05 00 -> Polarity of the APIC I/O input signals
---------
02 0a 00 0e 0e 00 00 00 05 00 Interrupt Source Override (IRQ 14)
02 0a 00 0f 0f 00 00 00 05 00 Interrupt Source Override (IRQ 15)
---------
04 06 00 05 00 01 Local APIC NMI Structure

This structure describes the Local APIC interrupt input (LINTn) that NMI is connected to for each of the processors in the system where such a connection exists. This information is needed by OSPM to enable the appropriate local APIC entry.
Each Local APIC NMI connection requires a separate Local APIC NMI structure. For example, if the platform has 4 processors with ID 0-3 and NMI is connected LINT1 for processor 3 and 2, two Local APIC NMI entries would be needed in the MADT.

04 -> Local APIC NMI Structure
06 -> length = 6
00 -> ACPI Processor ID
05 00 -> MPS INTI flags See Table 5-24 for a description of this field.
01 -> Local APIC interrupt input LINTn to which NMI is connected.
------------
04 06 01 05 00 01 -> Local APIC NMI Structure

04 -> Local APIC NMI Structure
06 -> length = 6
01 -> ACPI Processor ID
05 00 -> MPS INTI flags See Table 5-24 for a description of this field.
01 -> Local APIC interrupt input LINTn to which NMI is connected.

-----------

Mal schauen, was bei mir Tolles drinsteht ... die Spannung steigt ^^

Edit: Sooo (apt-get ist schon toll) acpi dump installiert, und so schauts aus:
--------
APIC @ 0xdfff7d00
0000: 41 50 49 43 6e 00 00 00 01 76 4e 76 69 64 69 61 APICn....vNvidia
0010: 41 57 52 44 41 43 50 49 31 2e 30 42 41 57 52 44 AWRDACPI1.0BAWRD
0020: 01 01 01 01 00 00 e0 fe 01 00 00 00 00 08 00 00 ................
0030: 01 00 00 00 01 0c 02 00 00 00 c0 fe 00 00 00 00 ................
0040: 02 0a 00 00 02 00 00 00 00 00 02 0a 00 09 09 00 ................
0050: 00 00 0d 00 02 0a 00 0e 0e 00 00 00 05 00 02 0a ................
0060: 00 0f 0f 00 00 00 05 00 04 06 00 00 00 01 ..............
--------

Ok tja ... Pech gehabt, da wird einfach nicht der local APIC der CPU2 gelistet.
Da werd ich doch mal jetzt schauen, wie/ob ich den MADT irgendwie laden kann

ciao

Alex

P.S: Falls noch jemand nen MADT zur Verfügung stellen kann, immer her damit, besser einen zuviel als zuwenig

Piloboy · 28.05.2008

Du gehst da echt ins eingemachte, sag bescheid falls du noch was brauchst.
Mit einen 2. ACPI Dump kann ich nicht dienen, da ich hier 2 identische Boards hab.

Opteron · 28.05.2008

Piloboy schrieb:
Du gehst da echt ins eingemachte

Alles fürs Race ^^

Sag bescheid falls du noch was brauchst.
Mit einen 2. ACPI Dump kann ich nicht dienen, da ich hier 2 identische Boards hab.

Ich glaub ich habs jetzt, mit Deinem APIC File, kann ich jetzt die APIC header in jedem BIOS aufstöbern, nachdem das mit cbrom entpackt wurde, und man mit dem HExEditor im ACPI File stöbert.

Hab z.B. jetzt den APIC Code des K8NNXP939 hier:

415049437C00000001004E7669646961
4157524441435049312E304241575244
010101010000E0FE0100000000080000
010000000008010100000000010C0200
0000C0FE00000000020A000002000000
0000020A0009090000000D00020A000E
0E0000000500020A000F0F0000000500
040600000001040601000001

Unterschied zu Deinem ist nur, die "Polarity of the APIC I/O input signals". Ich denk das nehm ich jetzt als Referenz. Da ist alles genauso wie bei mir, nur das eben auch CPU2 mit dabei ist

Was ich nicht kapier ist das IRQ0 -> IRQ2 Mapping, das wird von Linux laut dmesg ignoriert ... *noahnung*

Naja egal, mal schauen, wie ich den doofen MADT laden kann

ciao

Alex

Opteron · 11.06.2008

So, hab mich mal getraut das BIOS zu patchen und zu flashen ...

Jetzt schaut das Ganze so aus:

[ 0.000000] Linux version 2.6.24-12-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 22:31:43 UTC 2008 (Ubuntu 2.6.24-12.22-generic)
[ 0.000000] Command line: root=UUID=424037A340379C9B loop=/ubuntu/disks/root.disk ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000dfff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfff3000 - 00000000e0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 917488) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
[ 0.000000] end_pfn_map = 1179648
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F66D0 checksum 0
[ 0.000000] ACPI: RSDP 000F66D0, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT DFFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP DFFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT DFFF30C0, 4C15 (r1 NVIDIA AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS DFFF0000, 0040
[ 0.000000] ACPI: APIC DFFF7D00, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] CPU has 2 num_cores
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 917488) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1179648
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 160
[ 0.000000] 0: 256 -> 917488
[ 0.000000] 0: 1048576 -> 1179648
[ 0.000000] On node 0 totalpages: 1048464
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1211 pages reserved
[ 0.000000] DMA zone: 2733 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 899112 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 00000000dfff0000 - 00000000dfff3000
[ 0.000000] swsusp: Registered nosave memory region: 00000000dfff3000 - 00000000e0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000fec00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffff0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000ffff0000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031125
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=424037A340379C9B loop=/ubuntu/disks/root.disk ro
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 41.818178] Marking TSC unstable due to TSCs unsynchronized
[ 41.818180] time.c: Detected 1889.991 MHz processor.
[ 41.820144] Console: colour VGA+ 80x25
[ 41.820147] console [tty0] enabled
[ 41.823893] Checking aperture...
[ 41.823941] CPU 0: aperture @ e8000000 size 128 MB
[ 41.863161] Memory: 4116716k/4718592k available (2466k kernel code, 77140k reserved, 1310k data, 316k init)
[ 41.863259] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 41.939992] Calibrating delay using timer specific routine.. 3782.45 BogoMIPS (lpj=7564916)
[ 41.940117] Security Framework initialized
[ 41.940170] SELinux: Disabled at boot.
[ 41.940229] AppArmor: AppArmor initialized
[ 41.940280] Failure registering capabilities with primary security module.
[ 41.940649] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 41.943077] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 41.944345] Mount-cache hash table entries: 256
[ 41.944514] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 41.944567] CPU: L2 Cache: 1024K (64 bytes/line)
[ 41.944617] CPU 0/0 -> Node 0
[ 41.944682] SMP alternatives: switching to UP code
[ 41.945260] Early unpacking initramfs... done
[ 42.263882] ACPI: Core revision 20070126
[ 42.263977] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 42.306793] Using local APIC timer interrupts.
[ 42.359677] APIC timer calibration result 13124927
[ 42.359679] Detected 13.124 MHz APIC timer.
[ 42.359814] SMP alternatives: switching to SMP code
[ 42.360295] Booting processor 1/2 APIC 0x1
[ 42.360348] APIC error on CPU0: 00(04)
[ 42.370342] APIC error on CPU0: 00(04)
[ 42.370842] APIC error on CPU0: 00(04)
[ 47.368590] Not responding.
[ 47.368637] Inquiring remote APIC #1...
[ 47.368684] ... APIC #1 ID: failed
[ 47.368863] ... APIC #1 VERSION: failed
[ 47.369042] ... APIC #1 SPIV: failed
[ 47.369252] Brought up 1 CPUs
[ 47.369358] CPU0 attaching sched-domain:
[ 47.369360] domain 0: span 01
[ 47.369362] groups: 01
[ 47.369499] net_namespace: 120 bytes
[ 47.369935] Time: 15:14:52 Date: 06/11/08
[ 47.370031] NET: Registered protocol family 16

Falls jemand noch ne Idee hat .... *noahnung*

Bootparameter -noapic bringt auch nichts>

[ 0.000000] Linux version 2.6.24-12-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 22:31:43 UTC 2008 (Ubuntu 2.6.24-12.22-generic)
[ 0.000000] Command line: root=UUID=424037A340379C9B loop=/ubuntu/disks/root.disk ro noapic
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000dfff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfff3000 - 00000000e0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 917488) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
[ 0.000000] end_pfn_map = 1179648
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F66D0 checksum 0
[ 0.000000] ACPI: RSDP 000F66D0, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT DFFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP DFFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT DFFF30C0, 4C15 (r1 NVIDIA AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS DFFF0000, 0040
[ 0.000000] ACPI: APIC DFFF7D00, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] CPU has 2 num_cores
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Entering add_active_range(0, 0, 160) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 917488) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1179648
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 160
[ 0.000000] 0: 256 -> 917488
[ 0.000000] 0: 1048576 -> 1179648
[ 0.000000] On node 0 totalpages: 1048464
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1211 pages reserved
[ 0.000000] DMA zone: 2733 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 899112 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 at 0xFEC00000.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Processors: 2
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 00000000dfff0000 - 00000000dfff3000
[ 0.000000] swsusp: Registered nosave memory region: 00000000dfff3000 - 00000000e0000000
[ 0.000000] swsusp: Registered nosave memory region: 00000000e0000000 - 00000000fec00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000
[ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffff0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000ffff0000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031125
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=424037A340379C9B loop=/ubuntu/disks/root.disk ro noapic
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 42.062514] Marking TSC unstable due to TSCs unsynchronized
[ 42.062516] time.c: Detected 1890.002 MHz processor.
[ 42.064480] Console: colour VGA+ 80x25
[ 42.064483] console [tty0] enabled
[ 42.068139] Checking aperture...
[ 42.068188] CPU 0: aperture @ e8000000 size 128 MB
[ 42.107412] Memory: 4116716k/4718592k available (2466k kernel code, 77140k reserved, 1310k data, 316k init)
[ 42.107510] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 42.184329] Calibrating delay using timer specific routine.. 3782.47 BogoMIPS (lpj=7564940)
[ 42.184454] Security Framework initialized
[ 42.184507] SELinux: Disabled at boot.
[ 42.184566] AppArmor: AppArmor initialized
[ 42.184617] Failure registering capabilities with primary security module.
[ 42.184986] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 42.187414] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 42.188683] Mount-cache hash table entries: 256
[ 42.188852] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 42.188906] CPU: L2 Cache: 1024K (64 bytes/line)
[ 42.188955] CPU 0/0 -> Node 0
[ 42.189020] SMP alternatives: switching to UP code
[ 42.189598] Early unpacking initramfs... done
[ 42.508219] ACPI: Core revision 20070126
[ 42.508314] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 42.510366] ACPI: setting ELCR to 0200 (from 1c88)
[ 42.510935] Using local APIC timer interrupts.
[ 42.563833] APIC timer calibration result 13125020
[ 42.563835] Detected 13.125 MHz APIC timer.
[ 42.563968] SMP alternatives: switching to SMP code
[ 42.564449] Booting processor 1/2 APIC 0x1
[ 42.564501] APIC error on CPU0: 00(04)
[ 42.574496] APIC error on CPU0: 00(04)
[ 42.574996] APIC error on CPU0: 00(04)
[ 47.572752] Not responding.
[ 47.572798] Inquiring remote APIC #1...
[ 47.572846] ... APIC #1 ID: failed
[ 47.573025] ... APIC #1 VERSION: failed
[ 47.573204] ... APIC #1 SPIV: failed
[ 47.573414] Brought up 1 CPUs
[ 47.573490] CPU0 attaching sched-domain:
[ 47.573492] domain 0: span 01
[ 47.573494] groups: 01
[ 47.573639] net_namespace: 120 bytes
[ 47.574076] Time: 16:11:29 Date: 06/11/08

ciao

Alex

Alyva · 24.06.2008

Hallo, ich weiss nicht ob der Thread noch aktuell ist und ich habe auch nicht wirklich Ahnung. Aber ich hätte da einfach fürs Verständnis 2 Fragen.

1. Eine MATD für Nforce 4 in ein Nforce 3 - 150 Board verfrachten funktioniert dass vom Prinzip her wirklich?

2. Das Board ist nur für Athlon FX und Opteron 100 (1xx) ausgelegt. Liegt da der Hund dann nicht schon in der Platine begraben? Auch wenn die 2xx Serie den selben Sockel hat.

Nur interessehalber.

P.S. Ach ja und läuft dein System inzwischen mit 2 Cores ?

Opteron · 24.06.2008

Alyva schrieb:
Hallo, ich weiss nicht ob der Thread noch aktuell ist und ich habe auch nicht wirklich Ahnung. Aber ich hätte da einfach fürs Verständnis 2 Fragen.

1. Eine MATD für Nforce 4 in ein Nforce 3 - 150 Board verfrachten funktioniert dass vom Prinzip her wirklich?

Vom Prinzip stehen im MADT nur CPU Spezifika, sowie ein paar IRQ routings, meiner Meinung nach hat das nix mit dem Chipsatz zu tun, kannst Dirs gerne selber anschauen, was alles im MADT stehen kann -> www.acpi.info

2. Das Board ist nur für Athlon FX und Opteron 100 (1xx) ausgelegt. Liegt da der Hund dann nicht schon in der Platine begraben? Auch wenn die 2xx Serie den selben Sockel hat.

AMD hat die Sockelbeschaltung zw. single und dual-core nicht geändert, die Platine scheidet also schon mal aus. Das einzigste was sein könnte ist der Chipsatz, da es auch ein paar K8T boards von VIA gab, die angeblich dual-core inkompatibel wären, aber ich wollte es eben mal probieren. Offiziell weiß man nichts vom nforce3-150, der Nachfolger nforce3-250 von dem ich den MADT geklaut hatte (nicht nforce4), ist dual core fähig.

P.S. Ach ja und läuft dein System inzwischen mit 2 Cores ?

Nö, leider nicht, der obige Stand ist der aktuelle, ich finde auch nichts, was die Fehlermeldung hier erklärt:
[ 42.360348] APIC error on CPU0: 00(04)
Das ist irgendein error code ... aber für was der steht ... *noahnung*

Abgesehen davon hab ich ein BIOS Update eines nforce3-250 boards gefunden, da steht unter Änderungen "Fix that Windows shows only 1 CPU with Opteron 275" ... das alte BIOS gibts auch noch zum Runterladen, da werde ich mal versuchen die beiden Version zu vergleichen. Das Blöde ist nur, dass das AMI BIOSe sind .. naja mal schaunen.

ciao

Alex

Alyva · 28.06.2008

Nun ja, also das APCI ist ja aufgeteilt in LAPCI und I/O APCI. Das I/O APCI nimmt die Interrupt Requests von Geräten im System entgegen und verteilt die Messages an den LAPCI in dem/den Prozessor/en und diese je nach wichtigkeit an den/die Kern/e.

So weit so gut (ja ich weiß es ist stark abgekürzt oben beschrieben aber es sollte für die folgende These reichen). Die MADT selber verwendet wie du selber erwähnt hast selbst beschriebene irq routings. Ok nun fängt mein kriminelles Halbwissen an

. Könnte es sein dass der Chipsatz sich mit dem MADT in diesem Punkt arg beisst, wenn es zur Initialisierung im Prozessor kommt? Nachdem im Prozessor LAPIC aktiviert wurde überschreibt ACPI drei irq Buse .

Abgesehen davon glaube ich dass es am Chipsatz liegt und dem Bios. Unter uns ich habe erhebliche Zweifel dass die Ami Biose da helfen werden. Auf der Gigabyte Seite zumindest hab ich nachlesen können dass das Board (sofern richtig von dir angegeben) einen N-Force 3 -150 Chipsatz hat. Wenn dem so ist, du kannst es ja auf dem Board nachschauen, dann wird dir der N-Force 3-250 MADT nicht weiterhelfen. Und ich gestehe meine Unkenntnis im Bezug auf die Vielfältigkeit von Bios-Versionen. Es ist ein Phönix Bios? Wusste gar nicht dass es das gibt.

*Edit

Meine Güte war ich besoffen an dem Tag. Und das Phoenix ein Award Bios ist hätte ich mir auch mal denken können

.

Aber die Hoffnung stirbt zuletzt. In diesem Sinne viel Erfolg beim Basteln. Toi, toi, toi.

Dual Core wird nicht erkannt -> ACPI Experten anwesend ?

Opteron

Redaktion
☆☆☆☆☆☆

2000k.sie

Vice Admiral Special

Opteron

Redaktion
☆☆☆☆☆☆

2000k.sie

Vice Admiral Special

ALT255@Seti

Vice Admiral Special

Opteron

Redaktion
☆☆☆☆☆☆

Piloboy

Admiral Special

Opteron

Redaktion
☆☆☆☆☆☆

Piloboy

Admiral Special

Opteron

Redaktion
☆☆☆☆☆☆

Opteron

Redaktion
☆☆☆☆☆☆

Piloboy

Admiral Special

Opteron

Redaktion
☆☆☆☆☆☆

Opteron

Redaktion
☆☆☆☆☆☆

Alyva

Vice Admiral Special

Opteron

Redaktion
☆☆☆☆☆☆

Alyva

Vice Admiral Special

Dual Core wird nicht erkannt -> ACPI Experten anwesend ?

Redaktion☆☆☆☆☆☆

Vice Admiral Special

Redaktion☆☆☆☆☆☆

Vice Admiral Special

Vice Admiral Special

Redaktion☆☆☆☆☆☆

Admiral Special

Redaktion☆☆☆☆☆☆

Admiral Special

Redaktion☆☆☆☆☆☆

Redaktion☆☆☆☆☆☆

Admiral Special

Redaktion☆☆☆☆☆☆

Redaktion☆☆☆☆☆☆

Vice Admiral Special

Redaktion☆☆☆☆☆☆

Vice Admiral Special

Redaktion
☆☆☆☆☆☆

Redaktion
☆☆☆☆☆☆

Redaktion
☆☆☆☆☆☆

Redaktion
☆☆☆☆☆☆

Redaktion
☆☆☆☆☆☆

Redaktion
☆☆☆☆☆☆

Redaktion
☆☆☆☆☆☆

Redaktion
☆☆☆☆☆☆

Redaktion
☆☆☆☆☆☆