Motherboard Monitor 5.3.5.0
- Ersteller Mighty
- Erstellt am
Mighty
Senior Moderator
☆☆☆☆☆☆
Das beliebte Diagnose-Tool Motherboard Monitor 5 ist in einer neuen Version 5.3.5.0 erschienen. Folgende Fixes wurden implementiert:<ul><i><font size="1">added:
Winbond W83647HF (thank you Winbond)
Increased support for the EPIA boards (VT1211) thank you VIA Germany and ACME.de
Configuration wizard, the reason for the increase in size of the d/l
Special dump on the system info tab used to add your board to the config wizard for other users.
wm_pause and wm_resume message (see help file advanced - messages)
Priority function added to the starter.dll
SetPath function added to the starter.dll in case you plan on running it as a service and it has no access to HKEY_CURRENT_USER in the reg.
2nd CPU temp on GA-7DPXDW+ which uses 1 LM90 for 2 CPU's (big thanks to Tim South for keeping at it)
templist.ini added, with this you can enter your own temp table, see the help file advanced section
Fixes:
installer would always recommend C:\program files even if your program files was on another drive, this should be fixed
autohide dashboard did not always work 100% when you had the dashboard set to start with MBM
problem with e-mail test button
dual monitor and OSD, the slided will now allow you to select a position on the left monitor
problem with ADM1030 fan speed (Charles Xuereb)
the LPC47xxx group of fans should respond better to the do not reset sensor chip option
ITE range of sensors fan sensor 3 dividor problem fixed (thanks Anthony Smith)
Changes:
installer offers to start MBM after install
installer will offer (checked) to start the help file if it's a new install
installer will offer (unchecked) to start the help file if it's an update install
ICH4-M auto enabled
English language file (thanks Wesley Chung)
fantemplist.ini has been changed, you now need to make a file for each fan you want to base a a temp sensor on, so fantemplist1.ini if you want to use fan1, fantemplist2.ini if you want to use fan 2
fantemplist increased to 16
Voltage.ini
GA-8IPE1000Pro
SOYO DRAGON KT400 (VTech)
GA-8KNXP (MeanGene)
EPoX 8RDA/8RDA (Valery Shatunov)
Elite L7S7A2 (Willem Schaaij)
Biostar M7VIG PRO (Chris Christo)
Asus A7V8X-X (Willem Schaaij)</font></i></ul><b>Download:</b>
<li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20031024180258">Motherboard Monitor 5.3.5.0</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20031024180259">Motherboard Monitor 5.3.5.0 Sprachpaket</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20031024180260">Motherboard Monitor 5.3.5.0 Mirror</a></li>
Thx TinyRK für den Hinweis
Winbond W83647HF (thank you Winbond)
Increased support for the EPIA boards (VT1211) thank you VIA Germany and ACME.de
Configuration wizard, the reason for the increase in size of the d/l
Special dump on the system info tab used to add your board to the config wizard for other users.
wm_pause and wm_resume message (see help file advanced - messages)
Priority function added to the starter.dll
SetPath function added to the starter.dll in case you plan on running it as a service and it has no access to HKEY_CURRENT_USER in the reg.
2nd CPU temp on GA-7DPXDW+ which uses 1 LM90 for 2 CPU's (big thanks to Tim South for keeping at it)
templist.ini added, with this you can enter your own temp table, see the help file advanced section
Fixes:
installer would always recommend C:\program files even if your program files was on another drive, this should be fixed
autohide dashboard did not always work 100% when you had the dashboard set to start with MBM
problem with e-mail test button
dual monitor and OSD, the slided will now allow you to select a position on the left monitor
problem with ADM1030 fan speed (Charles Xuereb)
the LPC47xxx group of fans should respond better to the do not reset sensor chip option
ITE range of sensors fan sensor 3 dividor problem fixed (thanks Anthony Smith)
Changes:
installer offers to start MBM after install
installer will offer (checked) to start the help file if it's a new install
installer will offer (unchecked) to start the help file if it's an update install
ICH4-M auto enabled
English language file (thanks Wesley Chung)
fantemplist.ini has been changed, you now need to make a file for each fan you want to base a a temp sensor on, so fantemplist1.ini if you want to use fan1, fantemplist2.ini if you want to use fan 2
fantemplist increased to 16
Voltage.ini
GA-8IPE1000Pro
SOYO DRAGON KT400 (VTech)
GA-8KNXP (MeanGene)
EPoX 8RDA/8RDA (Valery Shatunov)
Elite L7S7A2 (Willem Schaaij)
Biostar M7VIG PRO (Chris Christo)
Asus A7V8X-X (Willem Schaaij)</font></i></ul><b>Download:</b>
<li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20031024180258">Motherboard Monitor 5.3.5.0</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20031024180259">Motherboard Monitor 5.3.5.0 Sprachpaket</a></li><li><a href="http://www.planet3dnow.de/cgi-bin/file/get.pl?20031024180260">Motherboard Monitor 5.3.5.0 Mirror</a></li>
Thx TinyRK für den Hinweis
Zuletzt bearbeitet:
Woodstock
Grand Admiral Special
Achtung. Die links gehen nciht mehr das die 5.3.5.0 nicht mehr aktuell ist.
aktuell ist jetzt 5.3.5.1
http://mbm.livewiredev.com/
aktuell ist jetzt 5.3.5.1
http://mbm.livewiredev.com/
Ähnliche Themen
